|
|
|
|
 | 1560-01-590-3824 | BRACKET,STRUCTURAL COMPONENT,AIR | 12/02/2010 |
|
 | 1560-01-590-3824 | BRACKET,STRUCTURAL COMPONENT,AIR | | 0 |
|
|
|
 For additional information Register for Free Trial
|
 | L5337777-005 | THE BOEING COMPANY | 43999 |
For additional information Register for Free Trial
|
 | OVERALL LENGTH | 8.250 INCHES NOMINAL | | OVERALL WIDTH | 8.100 INCHES NOMINAL | | MATERIAL THICKNESS | 0.090 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET | | AIRCRAFT LOCATION | DUCT INBOARD LOWER | | AIRCRAFT STATION NUMBER | YF 1129.13 | | AIRCRAFT MISSION DESIGN SERIES | B-1B | | SPECIAL FEATURES | NHA L5331311 | | MATERIAL | STEEL CORROSION RESISTING |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | G | THE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 150.12 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | All Departments | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9). |
| | ELECTROSTATIC DISCHARGE CODE. | | All Departments | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity. |
| | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | P | Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. |
| | DEMILITARIZATION CODE. | | All Departments | D | USML Items – DEMIL required. Destroy item and components to prevent restoration or repair to a usable condition. (Note 5). |
|
For additional information Register for Free Trial |
|  | | | BRACKET,STRUCTURAL IAW THE BOEING COMPANY, CAGE 43999 DWG: L5337777 P/N: L5337777-005 1. SELECT MANUFACTURERS WHO HAVE ELIMINATED OZONE DEPLETING SUBSTANCES (ODC's) FROM THEIR PRODUCTS. 2. USE ASME Y14.5 IN LIEU OF ANSI Y14.5. 3. WHEN CHECKED BELOW OR LISTED IN THESE NOTES, DEFINITIONS APPLICABLE TO THIS PRODUCT ARE OR HAVE: (A) ENGINEERING CRITICAL IN APPLICATION: An item, which requires special manufacturing processes, controls, and testing of material or end items. Because of its use or application, failure to maintain the highest reliability of such an item could be catastrophic resulting in loss of life or serious injury, loss of a weapon system or extensive secondary damage, with direct impact on the capability to respond to a national emergency or to achieve wartime sustainability. (B) CRITICAL CHARACTERISTICS: Characteristics which, when defective, are likely to result in hazardous or unsafe conditions for individuals using, maintaining or depending upon the product; or, are likely to prevent performance of the tactical function of a major end item such as an aircraft, missile, space vehicle, engine or a major part thereof. (Derived from MIL-STD-1916). (C) MAJOR CHARACTERISTICS: Characteristics (other than critical or minor) which, when defective, are likely to result in failure or to reduce the usability of the product or a major end item for its intended purpose. (Derived from MIL-STD-1916). (D) MINOR CHARACTERISTICS: All characteristics not designated as critical or major but for which full conformity is required. (E) COMPLEX: Items having quality characteristics not wholly visible (hidden characteristics), in the end product for which contractual conformance must be established progressively through precise measurements, tests or controls applied during purchasing, manufacturing, performance, assembly and functional operation either as an individual item or in conjunction with other items [FAR SUBPART 46.203(b)]. (F) COMMERCIAL: Described in commercial catalogs, drawings or industrial standards [FAR SUBPART 46.203(a), (1)]. THIS PRODUCT HAS BEEN DETERMINED TO BE OR CONTAINS (AS CHECKED BELOW): " Engineering critical in application. Critical characteristics. Major characteristics. " Minor characteristics, all excepting critical and major. Complex. Available as a commercial product. When materials, processes or components are to be obtained from directed sources as indicated herein or in the specifications, alternate sources may only be utilized upon prior approval by the contracting officer of this procuring activity as a deviation. Bidders shall notify this procuring activity at the time of quotation of any drawing, specification or standard which is of more current data revision than those shown on the data listing or in these engineering notes. Determination of acceptability of the more currently dated data will be made by the responsible engineering office of this procuring activity. Lower tier specifications listed in or referenced by first tier specifications may not be shown on the data lists or engineering notes accompanying this contract but are nonetheless required by this contract for compliance. Exceptions would occur only when such lower tier requirements have been specifically waived or substitute specifications/requirements are designated herein. Reports, process sheets, inspection methods sheets and all other documents required by specifications imposed by this contract for contractor compliance which were previously required to be submitted to a prime design contractor shall be held at that facility for review by government personnel. When prime design source specifications require or provide for participation by that prime source quality, manufacturing, laboratory or engineering support services, these requirements or provisions do not apply when the contract was issued by this procuring activity. For these services or direction pertaining thereto, contact the cognizant government contract administration office or this procuring activity for assistance. The contractor is responsible for assuring that all dimensions, conditions, tests and test results identified in these engineering notes, applicable drawings, specifications and contract quality requirements are met by themselves and their suppliers. This requirement applies to all characteristics whether those characteristics have been specifically designed as being critical, major or are those minor characteristics not specifically designated as such. PROCESS DATA REQUIREMENTS (CHECK WHEN APPLICABLE) Prior to beginning of manufacture, the contractor will notify the engineering office of this procuring activity of all manufacturing process and processing procedures intended for use in production of this product. Once these processes are established, no changes shall be made without prior approval of the engineering office of this procuring activity. SERIALIZATION OF PARTS (CHECK WHEN APPLICABLE) Serialization of each part/assembly (contract end item) is required. 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATILE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." | | Cage# 43999 and PartNumber# L5337777-005 |
|
| | | L5337777 | DWG | BASIC | NT | 04/11/2011 | 04/11/2011 |  43999 | | L5351720 | DWG | BASIC | CN | 10/03/1984 | 04/11/2011 | 43999 | | L5351720 | DWG | BASIC | PL | 10/01/1984 | 04/11/2011 | 43999 | | L5337777 | DWG | BASIC | DD | 04/30/1974 | 04/11/2011 | 43999 | | 015903824-11040 | DWG | BASIC | RE | 02/09/2011 | 04/05/2011 | 13873 | | LA0104-026 | DWG | BASIC | CN | 07/24/2008 | 08/31/2009 | 43999 | | LA0104-026 | DWG | BASIC | SS | 07/24/2008 | 08/31/2009 | 43999 | | LA0116-020 | DWG | BASIC | CN | 10/18/1994 | 09/22/2006 | 43999 | | L0000024 | DWG | BASIC | CN | 04/04/1994 | 09/21/2006 | 43999 | | LA0116-020 | DWG | BASIC | SS | 11/11/1988 | 09/21/2006 | 43999 |
|
|
|
|
|
|
|
|