|
|
|
|
 | 1620-01-059-6842 | PIN-UPLOCK,ROLLER | 04/15/1978 |
|
 | 1620-01-059-6842 | PIN-UPLOCK,ROLLER | | 0 |
|
 | |  METAL DYNAMICS INTERNATIONAL CORPORATION | 0 | | 7729141-10 | PIN-UPLOCK,ROLLER | CHRISBARRY AIRCRAFT CORP | 20 |
For additional information Register for Free Trial
|
|
|
 | 7729141-10 | OGDEN AIR LOGISTICS CENTER | 98747 |
For additional information Register for Free Trial
|
 | END ITEM IDENTIFICATION | KC135 ACFT | | GENERAL CHARACTERISTICS ITEM DESCRIPTION | STEEL MIL-H-6875,4.210 IN. LG,1.420 IN. DIAMETER |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | G | THE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 422.64 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | U | Precious Metal type is unknown. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | PIN-UPLOCK, ROLLER P/N 7729141-10 1. OO-ALC LANDING GEAR ENGINEERING RETAINS ALL RIGHTS TO REVIEW AND ACCEPT MATERIAL REVIEW BOARD (MRB#S) DISPOSITIONS PRIOR TO SHIPMENT OF DISCREPANT ITEM. ALL DEVIATIONS, MINOR AND MAJOR, FROM THE ENGINEERING DRAWING PACKAGE SHALL BE SUBMITTED FOR MRB DISPOSITION. 2. PRIOR TO CONTRACT AWARD, THE CONTRACTOR SHALL CERTIFY TO THE GOVERNMENT IN WRITING FULL COMPLIANCE WITH MANUALS, SPECIFICATIONS, AND STANDARDS CALLED OUT AND REQUIRED FOR THE MANUFACTURE OF THIS CONTRACTED LANDING GEAR COMPONENT/ASSEMBLY. CONTRACTOR IS RESPONSIBLE TO COMPLETELY SEARCH THESE MANUAL, SPECIFICATIONS, AND STANDARDS AND FULLY UNDERSTAND THE REQUIREMENTS NECESSARY TO MANUFACTURE LANDING GEAR COMPONENTS. ANY QUESTIONS CAN BE FORWARDED TO OO-ALC LANDING GEAR ENGINEERING. 3. MATERIAL PER SAE AMS6411 IN LIEU OF AMS 6411. 4. HEAT TREAT PER SAE AMS-H-6875 IN LIEU OF MIL-H-6875. 5. ON PARTS HEAT TREATED 180 KSI AND ABOVE, ANY SURFACES GROUND/MACHINED AFTER HEAT TREAT WILL BE INSPECTED FOR BURNS PER MIL-STD-867. NO MORE THAN THREE SUCCESSIVE INSPECTIONS SHALL BE PERFORMED WITHOUT A WAIVER FROM OO-ALC LANDING GEAR ENGINEERING. GRINDING WILL BE PER MIL-STD-866. 6. SAFETY CRITICAL THREADS PER SAE AS8879 IN LIEU OF FED-HDB-H-28. 7. ENGINEERING DRAWING PRACTICES PER ASME Y14.100 IN LIEU OF AFR 81-10. 8. PERFORM FMPI PER ASTM E1444, USING FULL WAVE DIRECT CURRENT (FWDC), WET CONTINUOUS METHOD, FLUORESCENT TYPE WITH THE FOLLOWING ACCEPTANCE/REJECTION CRITERIA: NO RELEVANT INDICATIONS ALLOWED. THE INSPECTOR PERFORMING THE INSPECTION SHALL BE CERTIFIED TO NAS 410 LEVEL II OR POSSESS AFSC 2A752. THE INSPECTION SHALL BE PERFORMED IN ACCORDANCE WITH THE APPLICABLE -36 TECHNICAL ORDER. IF A PROCEDURE DOES NOT EXIST, THE INSPECTION PROCEDURES SHALL BE DEVELOPED BY A LEVEL III, AS SPECIFIED IN AIA/NAS 410, OR MAY BE PERFORMED BY AIR FORCE MILITARY OR CIVILIAN INSPECTION PERSONNEL PER TECHNICAL ORDERS 33B-1-1 AND 33B-1-2. 9. CHROMIUM PLATE PER MIL-STD-1501, TYPE II, CLASS 3 IN LIEU OF MIL-STD-150. THE MAXIMUM ALLOWABLE DELAY FOR THE 4-HOUR BAKE BETWEEN CHROMIUM PLATE AND CADMIUM PLATE OPERATIONS AS REFERENCED IN MIL-STD-1501 SHALL BE 4 HOURS. 10. PARTS SHALL BE SHOT PEENED IN ACCORDANCE WITH SAE AMS 2430 PRIOR TO PLATING. SHOT PEENING INTENSITY SHALL BE .006-.010 A2. THE SIZE OF THE SHOT SHALL BE .019-.028. USE HARD STEEL SHOT IN THE RANGE 55-65 HRC OR CERAMIC SHOT WITH A HARDNESS COMPARABLE TO 57-63 HRC. MARK IAW MIL-STD-130N, DATED 17 DEC 2007. CONFIGURATION CONTROL APPLIES SEE CLAUSE 52.246-9G36 (SECTION I). 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. Government First Article Preproduction approval required. Testing will be in accordance with applicable drawings, specifications and/or Engineering instructions. The first article offered shall be manufactured at the facilities in which production quantities are procured and produced under this contract. When submitting the first article(s) for government testing, a copy of the contract and all applicable drawings, specifications, engineering instructions, certifications, and inspection sheets shall be provided. Upon receipt and evaluation of the test report from the responsible government testing location, the contracting officer will provide final notification to the manufacturer. Any questions or concerns regarding the first article test requirements must be submitted through the contracting officer. Additional Wide Area Workflow (WAWF) instructions for government first article test CLIN: The contractor shall code the receiving report for government first article test CLIN in WAWF as Follows: Inspection at origin (Source)- Enter the DCMA office DODAAC listed on page 1 of the contract. Acceptance by other-Enter the issue by office DODAAC listed on page 1 of the contract. Ship to code-Enter the DODAAC of the test facility listed for the government first article test CLIN in the contract (See FAR Clause 52.209-4). FIRST ARTICLE TEST MARKING INSTRUCTIONS: FAT sample(s) packaging shall be clearly marked "FIRST ARTICLE TEST EXHIBIT(S) DO NOT POST TO STOCK!!!" in largest font possible with contrasting color to the packaging. Marking shall be located adjacent to the Package Shipping Label side and on at least one additional side of the package. THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATILE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." |
|
| | | 7729141 | DWG | BASIC | DD | 05/14/2003 | 09/25/2006 | 98747 | | 7729141 | DWG | BASIC | CN | 04/16/2003 | 09/25/2006 | 98747 |
|
|
|
|
|
|
|
|