|
|
|
|
 | 3110-01-064-4127 | BEARING,BALL,ROD END | 08/24/1978 |
|
 | 3110-01-064-4127 | BEARING,BALL,ROD END | | 0 |
|
 | REP-3-H5 FS570 | Bearing |  BAKER BEARING CO. | 120 | | GB525J3F | BEARING, BALL | DIXIE AIR PARTS SUPPLY, INC. | 1 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | GB525J3F | TIMKEN CO | 21335 | | GB525J3F | NORTHROP GRUMMAN SYSTEMS CORPORATION | 26512 | | REP3H5FS570 | TIMKEN CO | 21335 | | REP3H5FS570 | ROLLER BEARING CO OF AMERICA INC | 73134 |
For additional information Register for Free Trial
|
 | OVERALL LENGTH | 1.7500 INCHES MINIMUM AND 1.7800 INCHES MAXIMUM | | BORE DIAMETER | 0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM | | OVERALL OUTSIDE DIAMETER | 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM | | INNER RING WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM | | LENGTH FROM BORE CENTER TO SHANK END | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM | | BEARING SEAL TYPE | CONTACT | | ALIGNMENT TYPE | SELF-ALIGNING | | LUBRICATION MATERIAL | GREASE | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL COMP E52100 BALL |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | C | THIS PART REQUIRES ENGINEERING SOURCE APPROVAL BY THE DESIGN CONTROL ACTIVITY IN ORDER TO MAINTAIN THE QUALITY OF THE PART. AN ALTERNATE SOURCE MUST QUALIFY IN ACCORDANCE WITH THE DESIGN CONTROL ACTIVITY’S PROCEDURES, AS APPROVED BY THE COGNIZANT GOVERNMENT ENGINEERING ACTIVITY. VALID AMCS: 1, 2, 3, 4 AND 5. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 57.41 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | All Departments | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9). |
| | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | BEARING,BALL,ROD-END "CONFIGURATION CONTROL ITEM" GRUMMAN AEROSPACE CORP (26512) BETHPAGE LI,NY APPROVED SOURCE CONFIGURATION CONTROL ITEM IAW CITED DRAWING AND/OR PART NUMBER. SEE CLAUSE 52.246-9G36 (SECTION I). DOCUMENTATION REQUIREMENTS OF CLAUSE 52.211-9042 (SECTION L) APPLY FOR NEW OFFERORS NOT CITED HEREIN. ITEM IDENTIFICATION IAW MIL-STD-130N, DTD 17-DEC-2007. DATA IS PROPRIETARY OR INSUFFICIENT FOR COMPETITIVE PROCUREMENT FOREIGN BEARINGS: AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA AND FOR EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (BEARING ELEMENT, RETAINER, INNER RACE, OR OUTER RACE) MINED, PRODUCED OR MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST EXCEED 50% OF THE TOTAL COST OF THE BEARING COMPONENTS OF THAT BALL OR ROLLER BEARING. SEE DFARS CLAUSE 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER BEARINGS (DEC 2010). A CONTRACTOR'S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL BEING OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN BEARING WEBSITE AT http://www.aviatio n.dla.mil/UserWeb/ForeignBearingWaiver/index.htm TO OBTAIN A COPY OF THE CONTRACTOR'S DECLARATION FORM. PLEASE PRINT, COMPLETE, SIGN AND HAVE READY FOR SUBMISSION UPON REQUEST FROM THE BUYER. FAILURE TO PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT BEING CONSIDERD FOR AWARD. IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS SOLICITATION MAY BE CANCELLED AND A WAIVER MAY BE REQUESTED BY THE PROCUREMENT ACTIVITY. UPON RECEIPT OF AN APPROVED WAIVER FROM THE DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE RE-SOLICITED. SEE DFARS 225.7009-4, WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS (DEC 2010). SAMPLING: 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. . | Cage# 21335 and PartNumber# GB525J3F
Cage# 73134 and PartNumber# REP3H5FS570 |
|
|
|
|
|
|
|
|
|