|
|
|
|
 | 5305-01-071-9521 | SCREW,MACHINE | 02/17/1979 |
|
 | 5305-01-071-9521 | SCREW,MACHINE |  = Manual available. | 0 |
|
 | MS51958-73B | MACHINE SCREW | | 458 | | MS51958-73B | SCREW |  GALI CORPORATION | 503 | | FFS92 | SCREW | GALI CORPORATION | 2113 | | FFS92 | SCREW | GMS INTERNATIONAL CORPORATION | 0 | | FFS92 | SCREW, MACHINE | HERMES TECHNICAL INTERNATIONAL, INC | 47 | | FFS92 | SCREW | MIDWEST AEROSPACE, LTD. | 66 | | MS51958-73B | SCREW | FLIGHT SOURCE INC | 138 | | FFS92 | HARDWARE | CONCORD COMPONENTS INC | 205 | | FF-S-92 | HARDWARE | CONCORD COMPONENTS INC | 188 | | FFS92 | SCREW,MACHINE | SAIF INDUSTRIES | 230 | | FFS92 | SCREW | PCS AEROSPACE & MARKETING LLC | 296 | | MS51958-73B | MACHINE SCREW | AIRCRAFT RESOURCES, CORP. | 325 | | FFS92 | SCREW | HAYWARD AND GREEN DEFENCE LTD | 982 | | FFS92 | SCREW | KAMTECH SYSTEMS LTD | 1 | | FF-S-92 | SCREW,MACHINE | SAIF INDUSTRIES | 3512 | | FF-S-92 | SCREW;MACHINE | AIR & GROUND AVIATION INC | 1756 | | FFS-92 | SCREW;MACHINE | AIR & GROUND AVIATION INC | 8 | | FFS92. | SCREW | AIR & GROUND AVIATION INC | 150 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | FF-S-92 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERV | 81348 | | MS51958-73B | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE I | 80205 | | MS51958-73B | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTM | 96906 |
For additional information Register for Free Trial
|
 | FASTENER LENGTH | 2.406 INCHES MINIMUM AND 2.500 INCHES MAXIMUM | | HEAD STYLE | PAN | | HEAD DIAMETER | 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM | | HEAD HEIGHT | 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH | | SCREW MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924 CL 4 MIL SPEC SINGLE TREATMENT RESPONSE | | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 9C STYLE |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | G | THE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | | PRECIOUS METALS INDICATOR CODES. | | All Departments | U | Precious Metal type is unknown. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | SCREW, MACHINE ************************************************ QUALIFIED SUPPLIERS LIST FOR MANUFACTURERS/ QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLM/QSLD) REQUIREMENT (DLA TROOP SUPPORT OCTOBER 1999) FOR FSC'S 5305, 5306, 5307 AND 5310 (NUTS). ONLY MANUFACTURERS/DISTRIBUTORS LISTED ON THE QSLM/QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO THIS SOLICITATION (CLASS 2 FASTENERS). SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLM/QSLD REQUIREMENT MUST INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION. ANY BID/QUOTE/OFFER/BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S) AS CITED IN THE PURCHASE ORDER TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED BY THE QUOTER/OFFEROR. ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT. FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED QSLM/QSLD SUPPLIER WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, REFERENCES TO SOURCE INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ H1331, AND DLAD 52.246-9064, IF REFERENCED, DO NOT APPLY. FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE: http://www.troopsupport.dla.mil/ce/qsl/ -OR- WRITE TO: DLA TROOP SUPPORT ATTN: DLA TROOP SUPPORT - NASA, BLDG 6/D, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092 ************************************************ QUALITY ASSURANCE DATA SPECIFICATION STANDARD ASQ H1331 Table 1 Shall be used, and will take precedence over Sample Size Coding methods and Sampling Plan tables as outlined in military and federal specifications, standards, Commercial Item Descriptions (CIDs) prepared by DoD activities, and those sampling plans cited by military service and DLA Troop Support - Quality Assurance Provisions (QAPs). Those documents that identify the classification of characteristics as critical, major, and minor, shall have corresponding associated AQL Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes precedence over non-government standard ASQ Z1.4. Those specifications, standards, CIDs, drawings and QAPs using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor". | | Cage# 80205 and PartNumber# MS51958-73B |
|
| | | NASM51958 | OTH | BASIC | | 04/29/2010 | 04/29/2010 | | | NASM51958 | OTH | BASIC | | 10/07/2006 | 10/07/2006 | | | FF-S-92B(1) | AST | BASIC | | 10/03/2006 | 10/03/2006 | | | QAP-EQ001 | QAP | BASIC | QA | 02/13/1996 | 09/19/2006 | 14153 |
|
|
|
|
|
|
|
|