|
|
|
|
 | 5340-01-273-9505 | COVER,ACCESS | 03/03/1988 |
|
 | 5340-01-273-9505 | COVER,ACCESS | | 0 |
|
|
|
 For additional information Register for Free Trial
|
 | 16B4508-1 | DUCOMMUN AEROSTRUCTURES NEW YORK, INC. | 5P931 | | 16B4508-7 | LOCKHEED MARTIN CORPORATION | 81755 | | 16B4508-7 | AEROSPACE & COMMERCIAL TECHNOLOGIES, LLC | 1XKR3 | | 16B4508-7 | INFINITY FABRICATION, INC. | 06DM5 |
For additional information Register for Free Trial
|
 | CROSS-SECTIONAL SHAPE STYLE | FLAT | | BOLT CIRCLE DIAMETER | 4.330 INCHES NOMINAL | | OUTSIDE DIAMETER | 5.060 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND, MULTI HOLES | | BOLT CIRCLE HOLE QUANTITY | 6 | | BODY THICKNESS | 0.071 INCHES NOMINAL | | SECURING DEVICE TYPE | THREADED FASTENER | | END ITEM IDENTIFICATION | F-16C/D AIRCRAFT | | MATERIAL | ALUMINUM ALLOY |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | M | MASTER OR COORDINATED TOOLING IS REQUIRED TO PRODUCE THIS PART. THIS TOOLING IS NOT OWNED BY THE GOVERNMENT OR, WHERE OWNED, CANNOT BE MADE AVAILABLE TO OTHER SOURCES. VALID AMCS: 1, 2, 3, 4, AND 5. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 589.76 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | All Departments | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9). |
| | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | P | Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. |
| | DEMILITARIZATION CODE. | | All Departments | B | USML Items – Mutilation to the point of scrap required worldwide. (Note 7). (See DODI 2030.08 for scrap definition). |
|
For additional information Register for Free Trial |
|  | | | FIRST ARTICLE EXHIBIT AND MATERIAL CERTIFICATIONS SHALL BE SENT TO: DODAAC:FB2029) 809 MXSS/MXDEB BLDG 849 DEAR JOHN BAY HILL AFB, UT. 84056-5713 MARK FOR: FIRST ARTICLE INSPECTION AND TEST. DO NOT POST COVER,ACCESS P/N: 16B4508-7 Government First Article Preproduction approval required. Testing will be in accordance with applicable drawings, specifications and/or Engineering instructions. The first article offered shall be manufactured at the facilities in which production quantities are procured and produced under this contract. When submitting the first article(s) for government testing, a copy of the contract and all applicable drawings, specifications, engineering instructions, certifications, and inspection sheets shall be provided. Upon receipt and evaluation of the test report from the responsible government testing location, the contracting officer will provide final notification to the manufacturer. Any questions or concerns regarding the first article test requirements must be submitted through the contracting officer. Additional Wide Area Workflow (WAWF) instructions for government first article test CLIN: The contractor shall code the receiving report for government first article test CLIN in WAWF as Follows: Inspection at origin (Source)- Enter the DCMA office DODAAC listed on page 1 of the contract. Acceptance by other-Enter the issue by office DODAAC listed on page 1 of the contract. Ship to code-Enter the DODAAC of the test facility listed for the government first article test CLIN in the contract (See FAR Clause 52.209-4). FIRST ARTICLE TEST MARKING INSTRUCTIONS: FAT sample(s) packaging shall be clearly marked "FIRST ARTICLE TEST EXHIBIT(S) DO NOT POST TO STOCK!!!" in largest font possible with contrasting color to the packaging. Marking shall be located adjacent to the Package Shipping Label side and on at least one additional side of the package. "EXCEPTION TO DRAWNING" 1) THE SOURCE/MATERIAL, IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCE/ MATERIAL FOR THOSE ITEMS. ANY SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY PRIOR APPROVAL BY 00-ALC COGNIZANT ENGINEERING ACTIVITY. 2) DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL BY 00-ALC COGNIZANT ENGINEERING ACTIVITY. 3) USE MIL-STD-130 IN LIEU OF FPS-3008 4) 16PR006 IS NOT FURNISHED. USE IGES LOFT DATA 16B4508-7. 5) ALL ATTACHMENTS HOLES ARE TO BE LEFT UNDRILLED; TAG PART WITH NOTE, "PARTS ARE TO BE DRILLED UPON INSTALLATION". .........END OF SPECIAL INSTRUCTIONS........ CRITICAL APPLICATION ITEM: MARK IAW MIL-STD-130N, DATED 17 DEC 2007. CONFIGURATION CONTROL APPLIES SEE CLAUSE 52.246-9G36 (SECTION I). . ATTN: CONTRACTOR AND SERVICE ACTIVITY TEST MONITIOR........................................ DISAPPROVED FIRST ARTICLE(S) SHALL BE RETURNED TO THE CONTRACTOR AT THE CONTRACTOR'S EXPENSE. APPROVED AND CONDITIONALLY APPROVED FIRST ARTICLE(S) SHALL BE RETAINED AT THE SERVICE TEST ACTIVITY UNTIL DISPOSITION INSTRUCTIONS ARE RECEIVED FROM THE PCO. IF DISPOSITION INSTRUCTIONS ARE NOT RECEIVED WITHIN 30 DAYS AFTER PROVIDING THE FIRST ARTICLE TEST REPORT TO DSCR, REQUEST THAT THE DSCR QA SPECIALIST BE NOTIFIED....................... . 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. . THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATILE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." FIRST ARTICLE EXHIBIT AND MATERIAL CERTIFICATIONS SHALL BE SENT TO: DODAAC:FB2029) 809 MXSS/MXDEB BLDG 849 DEAR JOHN BAY HILL AFB, UT. 84056-5713 MARK FOR: FIRST ARTICLE INSPECTION AND TEST. DO NOT POST |
|
| | | 16PR070-APPENDIX-B | DWG | BASIC | AP | 05/21/2003 | 11/26/2013 |  81755 | | FPS-3001 | DWG | BASIC | CN | 02/03/2003 | 08/31/2013 | 81755 | | 16Z001 | DWG | BASIC | CN | 03/11/2009 | 06/13/2013 | 81755 | | 16Z001ISS204 | DWG | BASIC | PL | 12/21/2011 | 02/22/2012 | 81755 | | 16Z001ISS204 | DWG | BASIC | AL | 12/21/2011 | 02/22/2012 | 81755 | | FPS-3001 | DWG | BASIC | SS | 07/21/2010 | 11/01/2010 | 81755 | | NDTS-1502 | DWG | BASIC | SS | 07/17/2009 | 11/09/2009 | 81755 | | 16PR070-APPENDIX-A | DWG | BASIC | AP | 05/21/2003 | 10/27/2009 | 81755 | | 16Z001 | DWG | BASIC | SS | 03/11/2009 | 06/01/2009 | 81755 | | NDTS-1501 | DWG | BASIC | AM | 11/10/2004 | 09/11/2008 | 81755 |
|
|
|
|
|
|
|
|