|
|
|
|
 | 5340-01-290-5790 | COVER,ACCESS | 12/13/1988 |
|
 | 5340-01-290-5790 | COVER,ACCESS | | 0 |
|
|
|
|
|
 | 68A115120-2003 | THE BOEING COMPANY | 76301 |
For additional information Register for Free Trial
|
 | END ITEM IDENTIFICATION | F-15 ACFT | | SPECIAL FEATURES | ACCESS-VENT/DUMP LINE,OUTBOARD | | MATERIAL | ALUMINUM ALLOY 2024 |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | G | THE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 426.51 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | All Departments | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9). |
| | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | P | Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. |
| | DEMILITARIZATION CODE. | | All Departments | D | USML Items – DEMIL required. Destroy item and components to prevent restoration or repair to a usable condition. (Note 5). |
|
For additional information Register for Free Trial |
|  | | | COVER,ACCESS SPARES CONFIGURATION: 1. OMIT MATE WITH HOLES EXCEPTION DATA: 1. USE NAS1097 IN LIEU OF ST3M460 FINISH: 1. ANODIZE PER MIL-A-8625 TYPE II, CLASS 1 2. PRIME PER MIL-PRF-23377 TYPE II, CLASS C MARK IAW MIL-STD-130N, DATED 17 DEC 2007. CONFIGURATION CONTROL APPLIES SEE CLAUSE 52.246-9G36 (SECTION I). FIRST ARTICLE/PREPRODUCTION APPROVAL REQUIRED BY GOVERNMENT TESTING. SAMPLE SIZE 2 EACH. SAMPLE, IF APPROVED WILL NOT BE RETURNED TO THE CONTRACTOR. THE TESTING SHALL CONSIST OF VERIFICATION OF CONFORMANCE TO THE SPECIFIED DRAWINGS AND SPECIFICATIONS, TO INCLUDE A FORM, FIT, AND FUNCTION ON THE NEXT HIGHER ASSEMBLY (AIRCRAFT). A COPY OF THE CONTRACT, COPIES OF ASSOCIATED MATERIAL CERTIFICATIONS, AND COPIES OF ALL IN-PROCESS INSPECTION REPORTS SHALL BE SENT TO: 802 MXSS/MXREM ATTN: FIRST ARTICLE TEST LAB 450 THIRD ST. ROBINS AFB, GA 31098-1640 SEND FIRST ARTICLE TEST SAMPLES TO: DODAAC FD2060 DLA CENTRAL RECEIVING DDWG ER SPECIAL HANDLING, FIRST ARTICLE UNIT 455 BYRON STREET WR-ALC ROBINS AFB, GA 31098-1887 MARK FOR: FIRST ARTICLE INSPECTION AND TEST. DO NOT POST. ATTN: CONTRACTOR AND SERVICE ACTIVITY TEST MONITIOR........................................ DISAPPROVED FIRST ARTICLE(S) SHALL BE RETURNED TO THE CONTRACTOR AT THE CONTRACTOR'S EXPENSE. APPROVED AND CONDITIONALLY APPROVED FIRST ARTICLE(S) SHALL BE RETAINED AT THE SERVICE TEST ACTIVITY UNTIL DISPOSITION INSTRUCTIONS ARE RECEIVED FROM THE PCO. IF DISPOSITION INSTRUCTIONS ARE NOT RECEIVED WITHIN 30 DAYS AFTER PROVIDING THE FIRST ARTICLE TEST REPORT TO DSCR, REQUEST THAT THE DSCR QA SPECIALIST BE NOTIFIED....................... TECH DATA PACKAGE AVAILABILITY: SAMPLING: 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANS I/ASQ Z1.4-2008 ,DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFEC TS IS REQUIRED. 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. FLIGHT SAFETY CRITICAL AIRCRAFT PART THIS ITEM HAS TECHNICAL DATA THAT IS SUBJECT TO EXPORT CONTROL REGULATIONS, OR THE ITEM HAS NO TECHNICAL DATA BUT IT I S LISTED ON THE UNITED STATES MUNITIONS LIST (USML) OR THE COMMERCE CON TROL LIST (CCL), AND IT IS THEREFORE CONTROLLED FOR EXPORT BY THE INTERN ATIONAL TRAFFIC IN ARMS REGULATION (ITAR) OR EXPORT ADMINISTRATION REGU LATION (EAR). (SEE DFARS CLAUSE 252.204-7008.) DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE ; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE A T THE WORLD WIDE WEB ADDRESS: HTTP://WWW.LOGISTICSINFORMATIONSERVICE.DLA.MIL/JCP/, OR BY WRITING TO: UNITED STATES/CANADA JOINT CERTIFICATION OFFICE DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATTLE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS M UST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSI STANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEME NT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFE R, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 " EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICA BLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED T ECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APP LICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: SUPPLIERS ARE REQUIRED TO IDENTIFY SUB-CONTRACTOR S AT TIME OF QUOTING IF KNOWN. USE OF ANY SUB-CONTRACTOR SUPPLIER WI LL REQUIRE JCP CERTIFICATION APPROVAL. THIS IS AN AIR FORCE DESIGNATED CRITICAL SAFETY ITEM (CSI). . SOURCE INSPECTION REQUIRED . ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND APPROVAL. . ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. THIS IS AN AIR FORCE DESIGNATED CRITICAL SAFETY ITEM (CSI). . SOURCE INSPECTION REQUIRED . ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND APPROVAL. . ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. |
|
| | | PS15535 | DWG | BASIC | SU | 01/30/1989 | 09/23/2006 |  76301 | | 68A900001 | DWG | BASIC | CN | 10/04/1999 | 09/21/2006 | 76301 | | PS16001 | DWG | BASIC | SS | 12/09/2003 | 09/18/2006 | 76301 | | PS13201 | DWG | BASIC | SS | 09/09/2001 | 09/18/2006 | 76301 | | PS19000 | DWG | BASIC | SS | 02/08/2001 | 09/18/2006 | 76301 | | 68A900001 | DWG | BASIC | DD | 08/09/1999 | 09/18/2006 | 76301 | | ST3M667 | DWG | BASIC | ST | 11/30/1998 | 09/18/2006 | 76301 | | PS20018 | DWG | BASIC | SS | 04/17/1998 | 09/18/2006 | 76301 | | 68A115120 | DWG | BASIC | CN | 02/17/1998 | 09/18/2006 | 76301 | | 40M114 | DWG | BASIC | ST | 08/27/1997 | 09/18/2006 | 76301 |
|
|
|
|
|
|
|
|