|
|
|
|
 | 5915-01-075-0006 | FILTER,BAND PASS | 04/12/1979 |
|
 | 5915-01-075-0006 | FILTER,BAND PASS |  = Manual available. | 0 |
|
 | SM-A-776929 | FILTER |  COMPONENT ENTERPRISES COMPANY, INC. | 1 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | SM-A-776929 | L3 TECHNOLOGIES, INC. | 11447 | | SM-A-776929 | LOCKHEED MARTIN CORP LOCKHEED MARTIN INFORMATION S | 49671 | | SM-A-776929 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READ | 80063 | | S6B51-70/1-P | K&L MICROWAVE LLC | 50140 | | 3702 | PRECISION DEVICES, INC. | 0S4G1 |
For additional information Register for Free Trial
|
 | BODY LENGTH | 2.380 INCHES MAXIMUM | | BODY WIDTH | 0.980 INCHES MAXIMUM | | BODY HEIGHT | 0.750 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.000 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.588 INCHES NOMINAL | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 PIN INPUT 1ST FUNCTION | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 PIN OUTPUT 2ND FUNCTION | | BODY MATERIAL | METAL | | DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 30.0 MINIMUM BLANK AND 1.0 MAXIMUM BLANK 1ST FUNCTION | | BODY SURFACE TREATMENT | TIN |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 3 | ACQUIRE DIRECTLY FROM THE ACTUAL MANUFACTURER, WHETHER OR NOT THE PRIME CONTRACTOR IS THE ACTUAL MANUFACTURER. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | C | THIS PART REQUIRES ENGINEERING SOURCE APPROVAL BY THE DESIGN CONTROL ACTIVITY IN ORDER TO MAINTAIN THE QUALITY OF THE PART. AN ALTERNATE SOURCE MUST QUALIFY IN ACCORDANCE WITH THE DESIGN CONTROL ACTIVITY’S PROCEDURES, AS APPROVED BY THE COGNIZANT GOVERNMENT ENGINEERING ACTIVITY. VALID AMCS: 1, 2, 3, 4 AND 5. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Army | DA | Army | | Air Force | DF | Air Force | | U.S. Marine Corps. | DM | U.S. Marine Corps. | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 347.70 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | U | Precious Metal type is unknown. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | P | Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. |
| | DEMILITARIZATION CODE. | | All Departments | Q | Commerce Control List Items (CCLI) – Mutilation to the point of scrap required outside the United States. In the United States, mutilation requirement determined by the DEMIL Integrity Code. DoD Trade Security Controls (TSC) required in the United States. (Note 8). |
|
For additional information Register for Free Trial |
|  | | | FILTER,BAND PASS DLAD PROVISION 52.211-9009 IS APPLICABLE TO THIS SOLICITATION, THEREFORE SURPLUS MATERIAL WILL NOT BE CONSIDERED. IF PRESENT IN THE SOLICITATION, PROVISION 52.211-9003 AND CLAUSE 52.211-9000 ARE NOT APPLICABLE. Change Paragraph 3.1.6 (Center Frequency Insertion Loss) of U.S. Army (80063) Drawing Number SM-A-776929, Revision C, 89/06/01 from: 13 dB Maximum (70MHz) to: 11.5 dB Maximum (70MHz). IF THE APPLICABLE (OEM OR MILITARY) DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES AN ACCEPTABLE QUALITY LEVEL (AQL), THE SAMPLING ACCEPTANCE NUMBER SHALL BE REDUCED TO ZERO (0). FOR EXAMPLE, IF THE ACCEPT REJECT CRITERIA IS ACCEPT ON (3) DEFECTS AND REJECT ON (4) DEFECTS, THE NEW ACCEPT REJECT CRITERIA IS ACCEPT ON (0) DEFECTS AND REJECT THE ENTIRE LOT ON (1) DEFECT. EVEN THOUGH THE ACCEPTANCE LEVEL IS ELIMINATED, THE SAMPLE SIZE REMAINS THE SAME. THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE (ODS) IN THE DESIGN, MANUFACTURING, TESTING, CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM UNDER ANY MILITARY OR FEDERAL SPECIFICATION, STANDARD OR DRAWING REFERENCED IN THIS ITEM DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS OBTAINED. THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS. THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS DEFINED IN "FAR 11.001" OR TO PART-NUMBERED- ONLY ITEMS. THE TECHNICAL DATA CITED IN THIS SOLICITATION IS NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST MEET THE REQUIREMENTS OF THE CITED TECHNICAL DATA IN ADDITION TO THE REQUIREMENTS OF THE PART NUMBERED ITEM LISTED ON THIS SOLICITATION. ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE OFFERS IS NOT AVAILABLE AT THE PROCUREMENT AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. VENDOR ITEM CONTROL DRAWING (NEW CODE) | Cage# 0S4G1 and PartNumber# 3702
Cage# 50140 and PartNumber# S6B51-70/1-P
Cage# 11447 and PartNumber# SM-A-776929 |
|
|
|
|
|
|
|
|
|