|
|
|
|
 | 5935-01-063-4569 | NUT,COUPLING,ELECTRICAL CONNECTO | 08/05/1978 |
|
 | 5935-01-063-4569 | NUT,COUPLING,ELECTRICAL CONNECTO | | 0 |
|
 | MIL-C-38999 | CONNECTOR |  GALI CORPORATION | 3 | | MIL-C-38999 | CONNECTOR, RECEPTACL | HERMES TECHNICAL INTERNATIONAL, INC | 1 | | MIL-DTL-38999 | CONNECTOR | GALI CORPORATION | 159 | | MILC38999 | CONNECTOR,PLUG,ELECT | SAIF INDUSTRIES | 10 | | MIL-C-38999 | CONNECTOR,PLUG,ELECT | SAIF INDUSTRIES | 13 | | MS27512-16E | NUT | COMPONENT ENTERPRISES COMPANY, INC. | 1 | | MS27512-16E | GLENAIR SALES GROUP - MID-ATLANTIC | RESION LLC | 90 | | MIL-C-38999 | CONNECTOR | AIR & GROUND AVIATION INC | 9 | | MIL C 38999 | CONNECTOR | AIR & GROUND AVIATION INC | 9 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | MIL-C-38999 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DE | 81349 | | MS27512-16E | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTM | 96906 | | MIL-DTL-38999 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DE | 81349 |
For additional information Register for Free Trial
|
 | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | NUT HEIGHT | 0.125 INCHES MINIMUM AND 0.142 INCHES MAXIMUM | | DRILLED HOLE DIAMETER | 0.059 INCHES MINIMUM | | HOLE TYPE AND QUANTITY | 3 DRILLED | | WIDTH ACROSS FLATS | 1.562 INCHES NOMINAL | | THREAD SERIES | UNEF | | NOMINAL THREAD SIZE | 1.3750 INCHES | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | TEST DATA DOCUMENT | 81349-MIL-C-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | T | ACQUISITION OF THIS PART IS CONTROLLED BY QPL PROCEDURES. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | | PRECIOUS METALS INDICATOR CODES. | | All Departments | U | Precious Metal type is unknown. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | All Departments | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity. |
| | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | P | Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | ITEM NAME NUT,HEXAGON,CONNECT THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE (ODS) IN THE DESIGN, MANUFACTURING, TESTING, CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM UNDER ANY MILITARY OR FEDERAL SPECIFICATION, STANDARD OR DRAWING REFERENCED IN THIS ITEM DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS OBTAINED. THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS. THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS DEFINED IN "FAR 11.001" OR TO PART-NUMBERED- ONLY ITEMS. FULL AND OPEN COMPETITION APPLIES. FAR CLAUSE 52.246-11 APPLIES A QUALITY MANAGEMENT PROGRAM MEETING THE REQUIREMENTS OF ISO 9001:2008 OR THE FOLLOWING TAILORED VERSION OF ISO 9001:2008 IS REQUIRED OR A PROGRAM EQUIVALENT TO THE TAILORED VERSION OF THE ISO 9001:2008 IS REQUIRED. DLA TAILORED HIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008 4.2.1 General, Documentation Requirements [b and d only] 4.2.2 Quality manual 4.2.3 Control of documents 4.2.4 Control of records 6.2.2 Competence, training and awareness 6.4 Work environment (if applicable) 7.1 Planning of product realization 7.2.1 Determination of requirements related to the product 7.2.2 Review of the requirements related to product 7.2.3 Customer communication 7.3.7 Control of design and development changes 7.4.1 Purchase Product 7.4.3 Verification of purchased product 7.5.1 Control of production and service provision 7.5.3 Identification and traceability 7.5.4 Customer property (if applicable) 7.5.5 Preservation of product 7.6 Control of monitoring and measuring equipment 8.1a General for Measurement, Analysis and Improvement 8.2.2 Internal Audit 8.3 Control of nonconforming product 8.2.4 Monitoring and measurement of product 8.5.2 Corrective action 8.5.3 Preventive action |
|
| | | MIL-DTL-38999M | AST | BASIC | | 02/11/2015 | 10/03/2006 | | | MIL-DTL-38999L(2) SUP 1A | AST | BASIC | | 10/03/2006 | 10/03/2006 | | | MS27512G NOT 1 | AST | BASIC | | 06/10/2005 | 10/03/2006 | |
|
|
|
|
|
|
|
|