|
|
|
|
 | 5998-01-065-5776 | CIRCUIT CARD ASSEMBLY | 09/21/1978 |
|
 | 5998-01-065-5776 | CIRCUIT CARD ASSEMBLY | | 0 |
|
|
|
 For additional information Register for Free Trial
|
 | 104515-1 | L3HARRIS TECHNOLOGIES, INC | 24930 |
For additional information Register for Free Trial
|
 | OVERALL LENGTH | 6.094 INCHES NOMINAL | | OVERALL HEIGHT | 0.500 INCHES MAXIMUM | | OVERALL WIDTH | 5.688 INCHES NOMINAL | | SPECIAL FEATURES | CAPACITOR 6,CONNECTOR 1,DIODE 8,HEATSINK 1,JACK,TIP 4,PRINTED WIRING BOARD 1,RESISTOR 9,TRANSISTOR 3 |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 3 | ACQUIRE DIRECTLY FROM THE ACTUAL MANUFACTURER, WHETHER OR NOT THE PRIME CONTRACTOR IS THE ACTUAL MANUFACTURER. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | H | THE GOVERNMENT PHYSICALLY DOES NOT HAVE IN ITS POSSESSION SUFFICIENT, ACCURATE, OR LEGIBLE DATA TO PURCHASE THIS PART FROM OTHER THAN CURRENT SOURCE(S). (NOTE: THIS CODE IS APPLICABLE ONLY TO PARTS UNDER IMMEDIATE BUY REQUIREMENTS AND ONLY AS LONG AS THE DEFICIENCY IS UNDER REVIEW FOR RESOLUTION AND APPROPRIATE RECODING.) VALID AMCS: 1, 2, 3, 4 AND 5. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 12479.20 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | All Departments | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9). |
| | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | D | USML Items – DEMIL required. Destroy item and components to prevent restoration or repair to a usable condition. (Note 5). |
|
For additional information Register for Free Trial |
|  | | | CIRCUIT CARD ASSEMBLY THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE (ODS) IN THE DESIGN, MANUFACTURING, TESTING, CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM UNDER ANY MILITARY OR FEDERAL SPECIFICATION, STANDARD OR DRAWING REFERENCED IN THIS ITEM DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS OBTAINED. THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS. THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS DEFINED IN "FAR 11.001" OR TO PART-NUMBERED- ONLY ITEMS. FOR PRINTED CIRCUIT BOARDS OR PRINTED WIRING BOARDS WHERE MIL-PRF-55110(FORMERLY MIL-P-55110) OR MIL-P-50884 IS CITED, IT IS RECOMMENDED THAT MIL-PRF-31032 BE UTILIZED. MIL-PRF-55110 IS PRESENTLY INACTIVE FOR NEW DESIGNS AND HAS BEEN REPLACED BY MIL-PRF-31032. MIL-P-50884 WILL BECOME INACTIVE FOR NEW DESIGNS AND REPLACED BY MIL-PRF-31032. SINCE THERE CURRENTLY IS NO EQUIVALENT DOCUMENT FOR THE CANCELLED MIL-S- 13949 (FORMERLY MIL-P-13949), DSCC RECOMMENDS THAT THE CONTRACTOR HAVE A METHOD OF ASSURING THAT LAMINATE MATERIALS USED IN CONJUNCTION WITH DSCC CONTRACTS BE AT LEAST EQUIVALENT IN QUALITY AND RELIABILITY TO THAT WHICH WAS AVAILABLE PRIOR TO THE CANCELLATION OF MIL-S-13949 ON NOVEMBER 30, 1998. DLAD PROVISION 52.211-9009 IS APPLICABLE TO THIS SOLICITATION, THEREFORE SURPLUS MATERIAL WILL NOT BE CONSIDERED. IF PRESENT IN THE SOLICITATION, PROVISION 52.211-9003 AND CLAUSE 52.211-9000 ARE NOT APPLICABLE. ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE OFFERS IS NOT AVAILABLE AT THE PROCUREMENT AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. | | Cage# 24930 and PartNumber# 104515-1 |
|
|
|
|
|
|
|
|
|