Techincal Specification:
| GENERAL CHARACTERISTICS ITEM DESCRIPTION | CRIMP TYPE PINS,CRIMP PIN CONTACTS SHALL BE CAPABLE OF MEETING THE TENSILE STRENGTH REQ,TABLE X,OF MIL-C-39029;WITH BULBS REMOVED,INSULATION RESISTANCE SHALL BE DETERMINED AT ROOM AMBIENT TEMPERATURE WITH 500VDC APPLIED AS FOLLOWS:BETWEEN EACH CONDUCTOR;THE 500VDC SHALL BE MAINTAINED FOR 5 SECONDS OR LESS IF INSTRUMENTATION CONFIRMS A STEADY CURRENT,THE MIN,READING SHALL BE 200 MEGOHMS PER MIL-STD-202,METHOD 302,CONDITION B,IDENTIFY WITH ARMY P/N ON PACKAGING OR CONTAINER PER MIL-STD-130;PROTECT PINS WITH PROTECTIVE OVER WRAP | | TEST DATA DOCUMENT | 18876-13047888 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|