| DISPLACEMENT TYPE | CONSTANT |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 8000.0 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.677 CUBIC INCHES |
| CONNECTION TYPE | OUTLET |
| INLET |
| DRAIN |
| MOUNTING TYPE | FLANGE |
| CONNECTION QUANTITY | 3 |
| CONNECTION DESIGN | THREADED |
| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| SURFACE TREATMENT | ANODIZE HOUSING |
| MOUNTING GOVERNMENT STANDARD | AND10262 |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 4000 PSI AT MINUS 65 DEG F TO PLUS 275 DEG F |
| TORQUE LOAD RATING | 436.0 INCH-POUNDS |
| CONNECTION GOVERNMENT SPEC/STD | AND10050-12 AND AND10050-10 AND AND10050-4 |
| THREAD SIZE | 1.062-12 AND |
| 0.875-14 AND |
| 0.438-20 |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| THREAD LOCATION | INTERNAL |
| THREAD DIRECTION | RIGHT-HAND |
| SPLINE QUANTITY | 16 |
| SPLINE MAJOR DIAMETER | 0.862 INCHES MINIMUM AND |
| 0.867 INCHES MAXIMUM |
| SPLINE MINOR DIAMETER | 0.685 INCHES MINIMUM AND |
| 0.690 INCHES MAXIMUM |
| SPLINE PITCH | 20/30 |
| PITCH DIAMETER | 0.800 INCHES NOMINAL |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE LENGTH | 1.000 INCHES NOMINAL |
| SHAFT PROTRUSION LENGTH | 1.543 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING BOLT CIRCLE DIAMETER | 5.000 INCHES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.401 INCHES MINIMUM AND |
| 0.421 INCHES MAXIMUM |
| FSC APPLICATION DATA | HYDRAULIC SYSTEM AIRCRAFT |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SOURCE CONTROL DWG NO. 114HS129 FSCM 77272 |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 77272 |
| MFR SOURCE CONTROLLING REFERENCE | 114HS129-3 |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 62983 |
| DESIGN CONTROL REFERENCE | MF044L008C |