| BODY OUTSIDE DIAMETER | 1.390 INCHES MINIMUM AND 1.410 INCHES MAXIMUM |
| BORE DIAMETER | 0.625 INCHES NOMINAL FIRST |
| BORE DIAMETER | 0.801 INCHES NOMINAL SECOND |
| BORE DIAMETER | 0.885 INCHES NOMINAL THIRD |
| BORE DIAMETER | 0.938 INCHES NOMINAL FOURTH |
| BORE DIAMETER | 0.957 INCHES NOMINAL FIFTH |
| BORE DIAMETER | 1.000 INCHES NOMINAL SIXTH |
| BORE DIAMETER | 1.066 INCHES NOMINAL SEVENTH |
| DESIGN CHARACTERISTICS | DOUBLE ACTING SINGLE CYLINDER |
| DIAMETER | 0.4986 INCHES MINIMUM AND 0.4991 INCHES MAXIMUM MOUNTING FACILITY |
| FIRST END FORK DEPTH | 1.600 INCHES NOMINAL |
| FIRST END FORK SPAN WIDTH | 0.751 INCHES NOMINAL |
| FIRST END FORK WIDTH | 0.700 INCHES NOMINAL |
| FIRST END HOLE DIAMETER | 0.3437 INCHES NOMINAL |
| FIRST END LARGEST INSIDE DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| FIRST PISTON ROD END STYLE | FORK TYPE (CLEVIS) |
| INTEGRAL VALVE OPERATION METHOD | HYDRAULIC |
| OVERALL HEIGHT | 2.980 INCHES MINIMUM AND 3.030 INCHES MAXIMUM |
| OVERALL WIDTH | 2.600 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-268, COMP 2024, T4-CANCELED FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL | ALUMINUM ALLOY 2024 BODY |
| MOUNTING FACILITY LENGTH | 0.500 INCHES NOMINAL |
| MOUNTING TYPE | TRUNNION CENTER SECTION |
| PORT STYLE | GASKET SEAL |
| PORT THREAD CLASS | 3B |
| PORT THREAD DIAMETER | 0.437 INCHES NOMINAL |
| PORT THREAD QUANTITY PER INCH | 20 |
| PORT THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY PART NO. 204-076-053-11,FSMC 97499 |
| SEAT ANGLE IN DEG | 120.0 |
| SECOND END OUTSIDE DIAMETER | 0.593 INCHES NOMINAL |
| TEMP RATING | -65.0 CELSIUS AND 180.0 CELSIUS |