| AFTER BEARING SLEEVE LENGTH | 7.250 FEET NOMINAL |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 19.375 INCHES NOMINAL |
| AFTER END DESIGN | TAPERED |
| CONSTRUCTION | HOLLOW |
| COVERING LOCATION | ALL EXPOSED SURFACES COVERED |
| DEPTH | 1.531 INCHES NOMINAL |
| FORWARD BEARING SLEEVE LENGTH | 4.667 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 19.375 INCHES NOMINAL |
| FORWARD END COUPLING DESIGN | INTEGRAL |
| FORWARD END COUPLING LENGTH | 0.688 FEET NOMINAL |
| FORWARD END COUPLING OUTSIDE DIAMETER | 28.5000 INCHES NOMINAL |
| FORWARD END COUPLING THICKNESS | 3.500 INCHES NOMINAL |
| FURNISHED ITEMS AND QUANTITY | PROPELLER NUT,1; PROPELLER KEY,2 |
| INSIDE DIAMETER | 10.500 INCHES NOMINAL |
| MAJOR DIAMETER | 8.5000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890, CLASS AN MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| OUTSIDE DIAMETER | 17.750 INCHES NOMINAL |
| OVERALL LENGTH | 39.250 FEET NOMINAL |
| PROTECTIVE COVERING TYPE | RUBBER |
| QUANTITY | 2 |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER LENGTH | 3.802 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 17.750 INCHES NOMINAL |
| TAPER | 1.500 PER FOOT IN INCHES NOMINAL |
| THREAD LENGTH | 9.0000 INCHES |
| THREAD QUANTITY | 4 PER INCH |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| USAGE DESIGN | SUITABLE FOR DD931-933,936-938,940-944 VESSELS |
| USAGE LOCATION | PORT/STARBOARD |
| WIDTH | 3.125 INCHES MINIMUM AND 3.188 INCHES MAXIMUM |