| AFTER END COUPLING DESIGN | DETACHABLE |
| AFTER END DESIGN | TAPERED |
| DEPTH | 0.312 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| FEATURES PROVIDED | SLEEVE FLANGE COUPLING |
| FORWARD END COUPLING THICKNESS | 6.250 INCHES NOMINAL |
| FORWARD END COUPLING TYPE | FLANGE |
| FORWARD END DESIGN | TAPERED |
| FORWARD END MAJOR DIAMETER | 1.750 INCHES NOMINAL |
| FORWARD END TAPER LENGTH | 0.459 FEET NOMINAL |
| FORWARD END TAPER MAJOR DIAMETER | 2.500 INCHES NOMINAL |
| FORWARD END TAPER | 0.750 PER FOOT IN INCHES NOMINAL |
| FORWARD END THREAD QUANTITY | 5 PER INCH |
| FORWARD END THREAD LENGTH | 1.750 INCHES |
| FORWARD END COUPLING LENGTH | 0.667 FEET NOMINAL |
| FORWARD END COUPLING DESIGN | DETACHABLE |
| FORWARD END COUPLING OUTSIDE DIAMETER | 10.495 INCHES MINIMUM AND 10.500 INCHES MAXIMUM |
| KEYWAY QUANTITY | 1 |
| KEYWAY WIDTH | 0.6235 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| KEYWAY DEPTH | 0.312 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| MAJOR DIAMETER | 1.750 INCHES NOMINAL |
| OUTSIDE DIAMETER | 2.500 INCHES NOMINAL |
| OVERALL LENGTH | 20.709 FEET NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ARMCO TYPE 17-4PH, CONDITION H-1150 MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 630 |
| QUANTITY | 1 |
| WIDTH | 0.6235 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| TAPER MAJOR DIAMETER | 2.500 INCHES NOMINAL |
| TAPER | 0.750 PER FOOT IN INCHES NOMINAL |
| TAPER LENGTH | 0.604 FEET NOMINAL |
| THREAD LENGTH | 3.141 INCHES |
| THREAD QUANTITY | 5 PER INCH |
| UNIT TYPE | COMPLETE SHAFT |
| USAGE LOCATION | CENTER |