| CONSTRUCTION | SOLID |
| COVER | NOT PROVIDED |
| FIRST END CHAMFER LENGTH | 0.130 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| FIRST END CROSS-SECTIONAL SHAPE | SERRATED |
| FIRST END MAJOR DIAMETER | 2.2450 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 2.1875 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE IN DEG | 45.00 |
| FIRST END SERRATION LENGTH | 0.810 INCHES MINIMUM AND 0.930 INCHES MAXIMUM |
| FIRST END INTERNAL THREAD LENGTH | 0.880 INCHES NOMINAL |
| FIRST END THREAD SERIES/TYPE DESIGNATOR | UNF |
| FIRST END THREAD SIZE | 1/2-20 |
| FIRST END TEETH QUANTITY | 35 |
| FIRST END THREAD CLASS | 2B |
| FIRST END THREAD DIRECTION | RIGHT-HAND |
| MATERIAL | STEEL |
| OUTSIDE DIAMETER | 1.309 INCHES MINIMUM AND 1.559 INCHES MAXIMUM |
| OVERALL LENGTH | 51.630 INCHES MINIMUM AND 51.750 INCHES MAXIMUM |
| SECOND END CHAMFER LENGTH | 0.560 INCHES MINIMUM AND 0.680 INCHES MAXIMUM |
| SECOND END HOLE DEPTH | 0.620 INCHES MAXIMUM |
| SECOND END CROSS-SECTIONAL SHAPE | SERRATED |
| SECOND END TEETH QUANTITY | 33 |
| SECOND END HOLE DIAMETER | 0.620 INCHES MAXIMUM |
| SECOND END MAJOR DIAMETER | 2.1200 INCHES MINIMUM AND 2.1250 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 2.0625 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE IN DEG | 45.00 |
| SECOND END SERRATION LENGTH | 0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM |
| SOLID BAR END CHARACTERISTIC AT FIRST END | THREADED HOLE |
| SOLID BAR END CHARACTERISTIC AT SECOND END | UNTHREADED HOLE |
| SPECIAL FEATURES | FIRST END TO BE COUNTER BORED 0.50 INCHES DIAMETER AND 0.25 INCHES DEEP;ONE SPLINE FROM EACH END SHALL BE REMOVED SO THAT THE ARCH BETWEEN EACH OF THE REMOVED SPLINES IS 129 DEGREES IN A COUNTERCLOCKWISE DIRECTION WHEN VIEWED FROM THE FIRST END |
| TWIST DIRECTION | COUNTERCLOCKWISE |