|
|
|
National Stock Number:
2520-00-912-4520
Federal Supply Class:
2520
National Item Identification Number:
009124520
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 106087 | 12603 | CLARK EQUIPMENT CO | | 106087 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
|
Techincal Specification:
| FIRST END BEARING SEAT | NOT INCLUDED | | FIRST END FACILITY DIAMETER | 1.812 INCHES NOMINAL | | FIRST END FACILITY LOCATION | 0.166 IN.MIN TO 0.176 IN.MAX LG FROM SHAFT END | | FIRST END FACILITY WIDTH | 0.109 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 2.562 INCHES NOMINAL | | FIRST END SPLINE PRESSURE ANGLE IN DEG | 20.0 | | FIRST END SPLINE QUANTITY | 16 | | FIRST END SPLINE TYPE | INVOLUTE | | FIRST END PITCH DIAMETER | 1.860 INCHES NOMINAL | | FIRST END TYPE | SPLINED | | OVERALL LENGTH | 37.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4145H ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4145H | | METALLIC HARDNESS RATING | 363.0 MAXIMUM BRINELL STANDARD | | SECOND END BEARING SEAT | NOT INCLUDED | | SECOND END SPLINE PRESSURE ANGLE IN DEG | 20.0 | | SECOND END SPLINE TYPE | INVOLUTE | | SECOND END SPLINE QUANTITY | 16 | | SECOND END TYPE | SPLINED | | SECOND END PITCH DIAMETER | 1.860 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 2.562 INCHES NOMINAL |
|
|