|
|
|
National Stock Number:
2915-01-089-9846
Federal Supply Class:
2915
National Item Identification Number:
010899846
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 7584682 | 05228 | PTI TECHNOLOGIES INC. |
|
Techincal Specification:
| BODY DIAMETER | 4.910 INCHES MINIMUM AND 4.940 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 2.090 INCHES MINIMUM AND 2.150 INCHES MAXIMUM | | BODY OVERALL LENGTH | 6.435 INCHES MINIMUM AND 6.475 INCHES MAXIMUM | | DESIGN TYPE | LIMITED | | FILTRATION RATING IN MICRONS | 20.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT | | MATERIAL DOCUMENT AND CLASSIFICATION | 0Q-A-250/2 FED SPEC SINGLE MATERIAL RESPONSE CONTAINER/CARTRIDGE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/2 FED SPEC SINGLE MATERIAL RESPONSE FILTERING MEDIUM | | MATERIAL | ALUMINUM ALLOY CONTAINER/CARTRIDGE | | MATERIAL | ALUMINUM ALLOY FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) |
|
|