| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.156 INCHES |
| HUB NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| PITCH ANGLE | 45.0000 DEGREES |
| PITCH DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| PRESSURE ANGLE | 14.5000 DEGREES |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.138 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 32 TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN AND 1 THREADED TRANSVERSELY THROUGH HUB FIRST END |
| MOUNTING HOLE NOMINAL DIAMETER | 0.052 INCHES TRANSVERSELY THROUGH HUB FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.219 INCHES SECOND END |
| STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING |
| TEETH QUANTITY | 24 |
| TEETH TYPE | STRAIGHT |