| ATTACHMENT METHOD | CLAMP |
| BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.312 INCHES SECOND END |
| BORE STYLE | PLAIN BOTH ENDS |
| END NOMINAL DIAMETER | 0.312 INCHES FIRST END |
| END NOMINAL LENGTH | 0.141 INCHES FIRST END |
| FACE NOMINAL WIDTH | 0.104 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.302 INCHES FIRST END |
| FIRST STEP NOMINAL LENGTH | 0.062 INCHES FIRST END |
| HUB STYLE DESIGNATOR | 2 STEPS FIRST END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| HUB NOMINAL DIAMETER | 2.750 INCHES BETWEEN BODY AND FLANGE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.044 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.282 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 2.781 INCHES |
| PITCH DIAMETER | 2.7500 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SECOND STEP NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| SECOND STEP NOMINAL LENGTH | 0.078 INCHES FIRST END |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 176 |
| TOOTH FORM | STANDARD |