|
|
|
National Stock Number:
3020-01-086-5919
Federal Supply Class:
3020
National Item Identification Number:
010865919
Description:
GEAR,ANTIBACKLASH,SPUR
Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.
|
Manufacturer Information:
| P17-3-125C | 00141 | ROLLER BEARING CO OF AMERICA, INC |
|
Techincal Specification:
| ATTACHMENT METHOD | CLAMP | | BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS | | BORE STYLE | PLAIN BOTH ENDS | | END NOMINAL DIAMETER | 0.312 INCHES FIRST END | | END NOMINAL LENGTH | 0.250 INCHES FIRST END | | FACE NOMINAL WIDTH | 0.104 INCHES | | FIRST STEP NOMINAL DIAMETER | 0.375 INCHES FIRST END | | FIRST STEP NOMINAL LENGTH | 0.031 INCHES FIRST END | | HUB STYLE DESIGNATOR | 1 STEP FIRST END | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | PITCH DIAMETER | 1.9521 INCHES MINIMUM AND 1.9531 INCHES MAXIMUM | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END | | NOMINAL OUTSIDE DIAMETER | 1.9840 INCHES | | PRECISION CLASSIFICATION | QUALITY NUMBER 10 | | PRESSURE ANGLE | 20.0000 DEGREES | | STYLE DESIGNATOR | PROTRUDING HUB | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE HUB | | TEETH QUANTITY | 125 | | TOOTH FORM | STANDARD |
|
|