| END SIMILARITY | NOT IDENTICAL |
| KEYWAY DEPTH | 0.156 INCHES NOMINAL SECOND END THIRD PORTION |
| KEYWAY WIDTH | 0.313 INCHES NOMINAL SECOND END THIRD PORTION |
| OVERALL LENGTH | 19.125 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | B50R214,CLASS A,GENERAL ELECTRIC CO MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SCREW THREAD SERIES DESIGNATOR | SPECIAL SECOND END THIRD PORTION |
| SCREW THREAD SERIES DESIGNATOR | NC OR UNIFIED NATIONAL COARSE (UNC) FIRST END THIRD PORTION |
| SHAFT HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| SHAFT LOCATION | BOTH ENDS OF WORM |
| SHAFT THREAD DIRECTION | RIGHT-HAND FIRST END THIRD PORTION |
| SHAFT THREAD DIRECTION | RIGHT-HAND SECOND END THIRD PORTION |
| UNTHREADED SECTION KEYWAY DEPTH | 0.250 INCHES NOMINAL SECOND END SECOND PORTION |
| UNTHREADED SECTION KEYWAY WIDTH | 0.4940 INCHES MINIMUM AND 0.4960 INCHES MAXIMUM SECOND END SECOND PORTION |
| WORM BODY LENGTH | 10.000 INCHES NOMINAL |
| WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| WORM HELIX ANGLE | 11 DEG,41 MIN,56.24 SEC |
| WORM OUTSIDE DIAMETER | 3.494 INCHES MINIMUM AND 3.496 INCHES MAXIMUM |
| WORM PITCH DIAMETER | 3.000 INCHES NOMINAL |
| WORM THREAD DIRECTION | RIGHT-HAND |
| WORM PRESSURE ANGLE IN DEG | 25.000 |
| WORM THREAD QUANTITY | 2 |
| WORM THREAD LEAD | 1.9516 INCHES NOMINAL |
| WORM THREAD SECTION LENGTH | 6.000 INCHES NOMINAL |
| STRAIGHT UNTHREADED LENGTH | 0.875 INCHES NOMINAL FIRST END SECOND PORTION |
| STRAIGHT UNTHREADED LENGTH | 1.500 INCHES NOMINAL FIRST END FIRST PORTION |
| STRAIGHT UNTHREADED LENGTH | 1.688 INCHES NOMINAL SECOND END FIRST PORTION |
| STRAIGHT UNTHREADED LENGTH | 2.813 INCHES NOMINAL SECOND END SECOND PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.750 INCHES NOMINAL FIRST END SECOND PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 1.1250 INCHES MINIMUM AND 1.1255 INCHES MAXIMUM FIRST END FIRST PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 1.9670 INCHES MINIMUM AND 1.9675 INCHES MAXIMUM SECOND END SECOND PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 1.9686 INCHES MINIMUM AND 1.9690 INCHES MAXIMUM SECOND END FIRST PORTION |
| TEETH HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM |
| THREAD LENGTH | 0.875 INCHES NOMINAL SECOND END THIRD PORTION |
| THREAD LENGTH | 1.375 INCHES NOMINAL FIRST END THIRD PORTION |