|
|
|
National Stock Number:
3040-00-356-6892
Federal Supply Class:
3040
National Item Identification Number:
003566892
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 11547P5 | 06650 | BELL AND HOWELL PHILLIPSBURG CO CORPORATE OFFICES | | SM-B-338606 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1213 | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OR | | AISI 1113 ASSN STD SINGLE MATERIAL RESPONSE OR | | SAE 1113 ASSN STD SINGLE MATERIAL RESPONSE | | STYLE DESIGNATOR | ROUND W/DOUBLE CHAMFER | | CHAMFER ANGLE IN DEG | 45.0 | | OUTSIDE DIAMETER | 0.500 INCHES NOMINAL | | THICKNESS | 0.437 INCHES NOMINAL | | BORE DIAMETER | 0.2510 INCHES NOMINAL | | SURFACE FINISH AND LOCATION | 125 MICROINCHES LARGEST BEARING FLAT | | 64 MICROINCHES OPPOSITE BEARING FLAT | | SECURING HOLE QUANTITY | 2 | | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | SECURING HOLE TYPE AND LOCATION | THREADED ALL HOLES | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | ALL HOLES UNC | | NOMINAL THREAD SIZE AND LOCATION | 0.164 INCHES ALL HOLES |
|
|