|
|
|
National Stock Number:
3040-00-421-2219
Federal Supply Class:
3040
National Item Identification Number:
004212219
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 68626 | 93835 | PARKER HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END SPLINE LENGTH | 0.676 INCHES MINIMUM AND 0.681 INCHES MAXIMUM | | FIRST END SPLINE MAJOR DIAMETER | 0.4030 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.3250 INCHES MINIMUM AND 0.3340 INCHES MAXIMUM | | FIRST END STYLE | SPLINED (STRAIGHT) | | FSC APPLICATION DATA | MOTOR,HYDRAULIC,ACFT,58189 1650004212218 | | OVERALL LENGTH | 1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END SPLINE MAJOR DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 0.531 INCHES NOMINAL |
|
|