|
|
|
National Stock Number:
3040-00-693-5106
Federal Supply Class:
3040
National Item Identification Number:
006935106
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 588850PC7 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | T9161665PC7 | 24446 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 416 | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OR | | AISI 416 ASSN STD SINGLE MATERIAL RESPONSE OR | | SAE 51416 ASSN STD SINGLE MATERIAL RESPONSE | | STYLE DESIGNATOR | PLAIN ROUND | | OUTSIDE DIAMETER | 0.750 INCHES NOMINAL | | THICKNESS | 0.250 INCHES NOMINAL | | BORE DIAMETER | 0.4375 INCHES MINIMUM AND | | 0.4379 INCHES MAXIMUM | | SECURING HOLE QUANTITY | 2 | | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | SECURING HOLE TYPE AND LOCATION | THREADED 1ST HOLE | | TAPER PIN PILOT 2ND HOLE | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | 1ST HOLE UNC | | NOMINAL THREAD SIZE AND LOCATION | 0.112 INCHES 1ST HOLE | | TAPERED PIN SIZE ACCOMMODATED AND LOCATION | 4/0 2ND HOLE |
|
|