|
|
|
National Stock Number:
3040-00-896-1996
Federal Supply Class:
3040
National Item Identification Number:
008961996
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 868180-1 | 99193 | HONEYWELL INTERNATIONAL INC. | | 868605-5 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.7972 INCHES MINIMUM AND 0.8022 INCHES MAXIMUM | | FIRST END PITCH DIAMETER | 0.7913 INCHES NOMINAL | | FIRST END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL | | FIRST END SPLINE LENGTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM | | FIRST END SPLINE MAJOR DIAMETER | 0.7972 INCHES MINIMUM AND 0.8022 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.7318 INCHES MINIMUM AND 0.7398 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 25 | | FIRST END STYLE | SPLINED (INVOLUTE) | | LARGEST STEP DIAMETER | 0.850 INCHES MINIMUM AND 0.854 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5743 CSYMJB63.0 ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 21.800 INCHES MINIMUM AND 21.820 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END ANGLE BETWEEN FLATS | 180.0 DEGREES NOMINAL | | SECOND END DIAMETER | 0.8100 INCHES NOMINAL | | SECOND END STEP LENGTH | 0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM | | SECOND END STYLE | TWO FLATS | | STEP QUANTITY | 11 |
|
|