|
|
|
National Stock Number:
3040-00-896-4993
Federal Supply Class:
3040
National Item Identification Number:
008964993
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 185887-001 | 65092 | SOLARTRON ELECTRONICS INC WESTON INSTRUMENTS DIV |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.0905 INCHES MINIMUM AND 0.0907 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.0905 INCHES MINIMUM AND 0.0907 INCHES MAXIMUM | | OVERALL LENGTH | 2.478 INCHES MINIMUM AND 2.482 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-00763,CL 303 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SPECIAL FEATURES | 2ND 0.0905 TO 0.0907 IN. DIA BEARING SEAT ON 0.074 TO 0.076 IN. DIA | | SECOND END DISTANCE FROM BEARING SEAT TO END | 0.500 INCHES NOMINAL | | SECOND END BEARING SEAT DIAMETER | 0.0905 INCHES MINIMUM AND 0.0907 INCHES MAXIMUM | | SECOND END BEARING SEAT LENGTH | 0.070 INCHES MINIMUM AND 0.072 INCHES MAXIMUM | | SECOND END DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM | | SECOND END STYLE | BEARING SEAT | | STEP QUANTITY | 2 |
|
|