|
|
|
National Stock Number:
3040-00-897-7011
Federal Supply Class:
3040
National Item Identification Number:
008977011
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 370290 | 31361 | WOODWARD, INC. | | 370290 | 66503 | WOODWARD, INC. | | 370290 | FA3E7 | INJECTION ET REGULATION MARINE |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3730 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 0.311 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.3730 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.3725 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 36 | | FIRST END STYLE | SPLINED (STRAIGHT) | | LARGEST STEP DIAMETER | 0.373 INCHES NOMINAL | | OVERALL LENGTH | 2.656 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.3730 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.3730 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 36 | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 0.531 INCHES NOMINAL | | STEP QUANTITY | 7 |
|
|