|
|
|
National Stock Number:
3040-00-909-1221
Federal Supply Class:
3040
National Item Identification Number:
009091221
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 35-79501-1023-2 | 86329 | PARKER-HANNIFIN CORPORATION | | GB2177 | 86329 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | FEAT | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.6870 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 12 | | FIRST END STYLE | PLAIN | | FSC APPLICATION DATA | PUMP,ROTARY | | LARGEST STEP DIAMETER | 0.687 INCHES NOMINAL | | OVERALL LENGTH | 7.770 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END DIAMETER | 0.6475 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 0.750 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.6475 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.5310 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 30 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.5840 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL | | SPECIAL FEATURES | FLIGHT SAFETY CRITICAL | | STEP QUANTITY | 2 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|