|
|
|
National Stock Number:
3040-00-917-5999
Federal Supply Class:
3040
National Item Identification Number:
009175999
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 455696 | 19139 | EASTMAN KODAK CO | | 470774 | 19139 | EASTMAN KODAK CO |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | EK135, EASTMAN KODAK CO MFR REF SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | PASSIVATE | | STYLE DESIGNATOR | ROUND STEPPED | | OUTSIDE DIAMETER | 0.750 INCHES NOMINAL | | THICKNESS | 0.406 INCHES MINIMUM AND | | 0.416 INCHES MAXIMUM | | SMALL END DIAMETER | 0.615 INCHES MINIMUM AND | | 0.625 INCHES MAXIMUM | | BORE DIAMETER | 0.3760 INCHES MINIMUM AND | | 0.3780 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.187 INCHES MINIMUM AND | | 0.197 INCHES MAXIMUM | | SURFACE FINISH AND LOCATION | 32 MICROINCHES INSIDE PERIPHERY | | 63 MICROINCHES SMALLEST OUTSIDE PERIPHERY | | SECURING HOLE QUANTITY | 2 | | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | SECURING HOLE TYPE AND LOCATION | THREADED SINGLE HOLE | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | SINGLE HOLE UNC | | NOMINAL THREAD SIZE AND LOCATION | 0.138 INCHES SINGLE HOLE | | FSC APPLICATION DATA | PHOTOGRAPHIC FILM PROCESSING MACHINE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19139 | | DESIGN CONTROL REFERENCE | 470774 |
|
|