|
|
|
National Stock Number:
3040-00-960-0601
Federal Supply Class:
3040
National Item Identification Number:
009600601
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 12L9554-7 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| OUTSIDE DIAMETER | 1.5000 INCHES NOMINAL | | THICKNESS | 0.5550 INCHES MINIMUM AND | | 0.5650 INCHES MAXIMUM | | BORE DIAMETER | 1.2510 INCHES MINIMUM AND | | 1.2540 INCHES MAXIMUM | | SURFACE FINISH AND LOCATION | 125 MICROINCHES OVERALL | | SECURING HOLE QUANTITY | 2 | | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED ALL HOLES | | HOLE DIAMETER AND LOCATION | 0.2560 INCHES MINIMUM ALL HOLES AND | | 0.2580 INCHES MAXIMUM ALL HOLES | | SPECIAL FEATURES | HOLES CENTERED 0.2770 TO 0.2830 IN. FROM EITHER FACE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 81755 | | DESIGN CONTROL REFERENCE | 12L9554-7 |
|
|