|
|
|
National Stock Number:
3040-01-055-6663
Federal Supply Class:
3040
National Item Identification Number:
010556663
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 3166204 | 99193 | HONEYWELL INTERNATIONAL INC. | | 3166204-2 | 59364 | HONEYWELL INTERNATIONAL INC. | | 3166204-2 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM HOLE CENTER TO END | 2.11 INCHES MINIMUM AND 2.13 INCHES MAXIMUM | | FIRST END DIAMETER | 0.3140 INCHES MINIMUM AND 0.3145 INCHES MAXIMUM | | FIRST END HOLE DEPTH | 0.10 INCHES MINIMUM AND 0.12 INCHES MAXIMUM | | FIRST END STYLE | THREADED CROSS DRILLED | | LARGEST STEP DIAMETER | 0.3732 INCHES MINIMUM AND 0.3737 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 5.250 INCHES MINIMUM AND 5.270 INCHES MAXIMUM | | SECOND END DIAMETER | 0.2481 INCHES MINIMUM AND 0.2490 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.094 INCHES MINIMUM AND 0.104 INCHES MAXIMUM | | SECOND END GROOVE DIAMETER | 0.136 INCHES MINIMUM AND 0.138 INCHES MAXIMUM | | SECOND END STYLE | CIRCULAR GROOVED | | SPECIAL FEATURES | DIMENSION FROM END TO GROOVE 5.01-5.03 MIN/MAX (TAB J ON DRAWING). DIMENSION FROM COUNTER SUNK HOLE TO MAIN BODY 2.255-2.265 MIN/MAX (TAB K ON DRAWING).PASSIVATE IN ACCORDANCE WITH QQ-P-35 | | STEP QUANTITY | 2 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|