|
|
|
National Stock Number:
3040-01-088-5742
Federal Supply Class:
3040
National Item Identification Number:
010885742
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 124695 | 09205 | LOCKHEED MARTIN CORP ELECTRONICS AND MISSILES DIV | | 124695-3 | 09205 | LOCKHEED MARTIN CORP ELECTRONICS AND MISSILES DIV | | 124695-3 | 1U398 | WEST COAST CHUCKING |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.4380 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-T-570,CLASS S1 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | OVERALL LENGTH | 1.250 INCHES NOMINAL | | STEP QUANTITY | 3 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|