|
|
|
National Stock Number:
3040-01-089-7789
Federal Supply Class:
3040
National Item Identification Number:
010897789
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 1005-002744 | 0125B | GENERAL DYNAMICS EUROPEAN LANDSYSTEMS - SANTA BARBARA SISTEMAS SA | | 10054059 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 12524302 | 19200 | US ARMY ARDEC RDECOM | | 1270000051 | 9331B | STAR DEFENCE LOGISTICS &ENGINEERING SL | | 2 0028-132 | AC90N | BAE SYSTEMS HAGGLUNDS AKTIEBOLAG | | 2 0028-132 | S3465 | BAE SYSTEMS HAGGLUNDS AB |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 16.74 MILLIMETERS MINIMUM AND 16.87 MILLIMETERS MAXIMUM | | FIRST END STYLE | PLAIN | | MATERIAL DOCUMENT AND CLASSIFICATION | AVIBANK 53118 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | OVERALL LENGTH | 180.0 MILLIMETERS NOMINAL | | SECOND END DIAMETER | 16.74 MILLIMETERS MINIMUM AND 16.87 MILLIMETERS MAXIMUM | | SECOND END SPLINE MAJOR DIAMETER | 0.6220 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.5510 INCHES MINIMUM AND 0.5580 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 29 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.6041667 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 133.5 MILLIMETERS NOMINAL | | SPECIAL FEATURES | CONTROL KNOB ATTACHED TO FIRST END,60.0 MM DIA.,28.0 MM LG,HEAVY DIAMOND KNURL OD OF KNOB,MARKING LEGEND ON KNOB - FIRE |
|
|