|
|
|
National Stock Number:
3040-01-098-7357
Federal Supply Class:
3040
National Item Identification Number:
010987357
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 94236 | 77646 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 94236-1 | 77646 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.2000 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.200 INCHES NOMINAL | | OVERALL LENGTH | 7.395 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-8808 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 321 | | SECOND END DIAMETER | 0.7500 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1290 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.200 INCHES NOMINAL | | SECOND END STYLE | UNTHREADED CROSS DRILLED | | SPECIAL FEATURES | UNTHD DRILLED HOLE 0.136 IN DIA,W/INSERTED TUBE,LOCATED 3.220 IN C TO C DISTANCE FROM CROSSED DRILLED HOLE ON 2ND END | | STEP QUANTITY | 2 |
|
|