|
|
|
National Stock Number:
3040-01-430-7348
Federal Supply Class:
3040
National Item Identification Number:
014307348
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| A3245934 | 1EG13 | LAGUNA INDUSTRIES INC. | | A3245934 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 90.0 | | BORE DIAMETER | 0.7500 INCHES NOMINAL | | HOLE DIAMETER AND LOCATION | 0.1900 INCHES NOMINAL ALL HOLES | | LARGEST DIAMETER LENGTH | 0.1250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OR AISI 4340 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 4340 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4340 | | OUTSIDE DIAMETER | 2.0000 INCHES NOMINAL | | SECURING HOLE QUANTITY | 4 | | SECURING HOLE TYPE AND LOCATION | UNTHREADED ALL HOLES | | SMALL END DIAMETER | 1.2500 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND STEPPED | | SURFACE TREATMENT | CHROMATE ZINC | | THICKNESS | 2.1300 INCHES NOMINAL |
|
|