| MATERIAL | STEEL COMP E51100 BALL |
| STEEL COMP E51100 INNER RING |
| STEEL COMP E51100 OUTER RING |
| STEEL COMP E51100 ROD END BODY |
| PLASTIC SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| 66 FED STD SINGLE MATERIAL RESPONSE ROD END BODY |
| STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| SHANK STYLE | EXTERNALLY THREADED |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SURFACE TREATMENT | CADMIUM EXPOSED SURFACES AS MOUNTED |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416. TY 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| OVERALL LENGTH | 2.3290 INCHES MINIMUM AND |
| 2.3590 INCHES MAXIMUM |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND |
| 0.2500 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.9280 INCHES MINIMUM AND |
| 0.9480 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.4280 INCHES MINIMUM AND |
| 0.4480 INCHES MAXIMUM |
| INNER RING WIDTH | 0.5880 INCHES MINIMUM AND |
| 0.5930 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.8650 INCHES MINIMUM AND |
| 1.8850 INCHES MAXIMUM |
| SHANK DIAMETER | 0.3750 INCHES NOMINAL |
| SHANK THREAD LENGTH | 1.1250 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| LUBRICATION MATERIAL | GREASE |
| SPECIAL FEATURES | ONE SLOT IN LG OF THD,0.093 IN. MIN,0.098 IN. MAX,0.306 IN. MIN,0.311 IN. MAX,FROM BOTTOM OF THD |
| TEST DATA DOCUMENT | 76301-MAC P.S. 21201 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |