|
|
|
National Stock Number:
3110-00-293-9028
Federal Supply Class:
3110
National Item Identification Number:
002939028
Description:
BEARING,ROLLER,ROD END
Detail:
A SPECIAL SINGLE OR MULTIPLE-ROW ROLLER BEARING, RIGID OR SELF-ALIGNING, AND CONSTRUCTED WITH EITHER INSIDE THREADED, PLAIN HOLLOW, MAILE THREADED, OR SOLID SHANK.
|
Manufacturer Information:
| SM3-6A | 77896 | REXNORD INDUSTRIES, LLC | | ST3 | 77896 | REXNORD INDUSTRIES, LLC |
|
Techincal Specification:
| ALIGNMENT TYPE | SELF-ALIGNING | | BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 0.1900 INCHES NOMINAL | | INNER RING WIDTH | 0.4370 INCHES NOMINAL | | LENGTH FROM BORE CENTER TO SHANK END | 1.3800 INCHES NOMINAL | | LUBRICATION MATERIAL | GREASE | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE | | OUTER RING WIDTH | 0.3500 INCHES NOMINAL | | OVERALL LENGTH | 1.7800 INCHES NOMINAL | | OVERALL OUTSIDE DIAMETER | 0.8000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL S 7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING | | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL | | MATERIAL | STEEL COMP E52100 INNER RING | | MATERIAL | STEEL COMP E52100 ROLLER | | MATERIAL | STEEL SNAP RING | | NOMINAL THREAD SIZE | 0.375 INCHES | | SHANK DIAMETER | 0.3750 INCHES NOMINAL | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 0.7500 INCHES NOMINAL | | SHIELD QUANTITY | 2 | | SEAL QUANTITY | 2 | | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL | | SELF-ALIGNMENT LOCATION | INTERNAL | | SPECIAL FEATURES | WITH GREASE FITTING | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | STYLE DESIGNATOR | SINGLE ROW, CONCAVE ROLLERS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES | | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND |
|
|