| BORE DIAMETER | 0.1250 INCHES NOMINAL |
| BORE SHAPE | STRAIGHT |
| FLANGE OUTSIDE DIAMETER | 0.2960 INCHES NOMINAL |
| FLANGE WIDTH | 0.0310 INCHES NOMINAL |
| INTERNAL CLEARANCE | 0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | OIL |
| OUTER RING OUTSIDE DIAMETER | 0.2500 INCHES NOMINAL |
| OVERALL WIDTH | 0.1094 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP 440A INNER RING |
| MATERIAL | STEEL COMP 440A OUTER RING |
| MATERIAL | STEEL COMP 440A BALL |
| MATERIAL | STEEL COMP 410 RETAINER |
| MATERIAL | STEEL COMP 410 SHIELD |
| RETAINER FABRICATION METHOD | STAMPED |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | PEAK STARTING TORQUE LIMIT IS 1500 MG/MM UNDER 75 GM THRUST LOAD |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |