| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.3750 INCHES NOMINAL |
| BORE SHAPE | STRAIGHT |
| FLANGE OUTSIDE DIAMETER | 0.9690 INCHES NOMINAL |
| FLANGE WIDTH | 0.0620 INCHES NOMINAL |
| INTERNAL CLEARANCE | 0.0001 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL | OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| OUTER RING OUTSIDE DIAMETER | 0.8750 INCHES NOMINAL |
| OVERALL WIDTH | 0.2812 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATERIAL | STEEL CORROSION RESISTING RETAINER |
| MATERIAL | STEEL CORROSION RESISTING SNAP RING |
| MATERIAL | STEEL COMP 440A OUTER RING |
| MATERIAL | STEEL COMP 440A BALL |
| MATERIAL | STEEL COMP 440A INNER RING |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 1 |
| SHIELD QUANTITY | 1 |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| SPECIAL FEATURES | SHIELD LOCATED ON FLANGE END |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |