| BORE DIAMETER | 2.4014 INCHES MINIMUM AND 2.4016 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| INNER RING WIDTH | 1.9940 INCHES MINIMUM AND 1.9990 INCHES MAXIMUM |
| INTERNAL CLEARANCE | 0.0038 INCHES MINIMUM RADIAL AND 0.0046 INCHES MAXIMUM RADIAL AND 0.0030 INCHES NOMINAL AXIAL |
| LOAD DIRECTION | RADIAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6414 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE 52100 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE 52100 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE 52100 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL RETAINER |
| OUTER RING WIDTH | 1.7120 INCHES MINIMUM AND 1.7170 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 4.0397 INCHES MINIMUM AND 4.0400 INCHES MAXIMUM |
| PRECIOUS MATERIAL AND LOCATION | RETAINER SILVER |
| PRECIOUS MATERIAL | SILVER |
| RETAINER FABRICATION METHOD | MACHINED |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| SURFACE FINISH | GROUND |
| SPECIAL FEATURES | STABILIZED FOR OPERATION FROM M65 DEG F TO P800 DEG F,C28.0 TO C32.0 ROCKWELL HARDNESS RETAINER |
| TEST DATA DOCUMENT | 99207-5034T07+03 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |