| BORE DIAMETER | 45.00 MILLIMETERS NOMINAL |
| OVERALL OUTSIDE DIAMETER | 75.00 MILLIMETERS NOMINAL |
| OVERALL WIDTH | 32.00 MILLIMETERS NOMINAL |
| INTERNAL CLEARANCE | 0.0120 INCHES MINIMUM AXIAL AND 0.0190 INCHES MAXIMUM AXIAL |
| LOAD DIRECTION | ANGULAR |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL BALL |
| MATERIAL | STEEL RETAINER |
| MATERIAL | STEEL INNER RING |
| MATERIAL | STEEL OUTER RING |
| RETAINER FABRICATION METHOD | MACHINED |
| PRECIOUS MATERIAL AND LOCATION | RETAINER SILVER |
| PRECIOUS MATERIAL | SILVER |
| SPECIAL FEATURES | STABILIZED FOR OPERATION AT M65 DEG F TO P600 DEG F,C58.0 MIN ROCKWELL HARDNESS RINGS AND BALLS,BEARING WITH POINT OF V TO HAVE SEPARABLE INNER RING |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
| SURFACE FINISH | GROUND |
| TEST DATA DOCUMENT | 78286-SB1139-101 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |