| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.6691 INCHES MINIMUM AND 0.6693 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| INTERNAL CLEARANCE | 0.0007 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | UNITEMP 500,FSCM 59595 MFR REF SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| MATERIAL DOCUMENT AND CLASSIFICATION | 1545732-1,83298 MFR REF SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI/SAE 1008 FED STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI/SAE E52100 FED STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL | PLASTIC TETRAFLUOROETHYLENE AND GLASS FIBER SEAL |
| MATERIAL | STEEL COMP 1008 RETAINER |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| OVERALL OUTSIDE DIAMETER | 1.3778 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM |
| OVERALL WIDTH | 0.3887 INCHES MINIMUM AND 0.3937 INCHES MAXIMUM |
| SPECIAL FEATURES | BEARING STABILIZED FOR OPERATION AT 375 DEG F,LUBRICANT FILLED 30 TO 50 PCT OF VOID |
| RETAINER FABRICATION METHOD | PRESSED |
| SEAL QUANTITY | 2 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |
| TEST DATA DOCUMENT | 83298-1545732-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |