| BORE DIAMETER | 0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| INNER RING WIDTH | 0.1396 INCHES MINIMUM AND 0.1406 INCHES MAXIMUM |
| INTERNAL CLEARANCE | 0.0001 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 440C ASSN STD ALL MATERIAL RESPONSES BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 440C ASSN STD ALL MATERIAL RESPONSES INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 440C ASSN STD ALL MATERIAL RESPONSES OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 440C ASSN STD ALL MATERIAL RESPONSES RETAINER |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C RETAINER |
| MATERIAL | STEEL COMP 440C OUTER RING |
| OUTER RING WIDTH | 0.1084 INCHES MINIMUM AND 0.1094 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.3123 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| RETAINER FABRICATION METHOD | PRESSED |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |
| TEST DATA DOCUMENT | 73030-720280-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SPECIAL FEATURES | STABILIZED FOR OPERATION FROM M65 DEG F TO P250 DEG F,C55.0 TO C64.0 ROCKWELL HARDNESS RINGS AND BALL |