| MATERIAL | STEEL BALL |
| STEEL INNER RING |
| STEEL OUTER RING |
| STEEL ROD END BODY |
| RUBBER SYNTHETIC SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | REP3F4FS210,21335 MFR REF SINGLE MATERIAL RESPONSE BALL |
| REP3F4FS210,21335 MFR REF SINGLE MATERIAL RESPONSE INNER RING |
| REP3F4FS210,21335 MFR REF SINGLE MATERIAL RESPONSE OUTER RING |
| REP3F4FS210,21335 MFR REF SINGLE MATERIAL RESPONSE ROD END BODY |
| REP3F4FS210,21335 MFR REF SINGLE MATERIAL RESPONSE SEAL |
| STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| SHANK STYLE | INTERNALLY THREADED W/BEAD |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| SELF-ALIGNMENT ANGLE | 0.10 DEGREES NOMINAL |
| OVERALL LENGTH | 1.7660 INCHES NOMINAL |
| BORE DIAMETER | 0.1897 INCHES MINIMUM AND |
| 0.1900 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.7710 INCHES MINIMUM AND |
| 0.7910 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.3180 INCHES MINIMUM AND |
| 0.3380 INCHES MAXIMUM |
| INNER RING WIDTH | 0.4950 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.3650 INCHES MINIMUM AND |
| 1.3850 INCHES MAXIMUM |
| SHANK DIAMETER | 0.3650 INCHES MINIMUM AND |
| 0.3850 INCHES MAXIMUM |
| WIDTH ACROSS FLATS | 0.4380 INCHES NOMINAL |
| SHANK THREAD LENGTH | 0.7500 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| THREAD QUANTITY PER INCH | 28 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| LUBRICATION MATERIAL | GREASE |