| BEARING PRELOAD RATING | 90.0 POUNDS MINIMUM AND 110.0 POUNDS MAXIMUM |
| BORE DIAMETER | 3.0622 INCHES MINIMUM AND 3.0625 INCHES MAXIMUM |
| CONTACT ANGLE | 15.0 DEGREES MINIMUM AND 25.0 DEGREES MAXIMUM |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| OVERALL OUTSIDE DIAMETER | 3.8746 INCHES MINIMUM AND 3.8750 INCHES MAXIMUM |
| OVERALL WIDTH | 0.6040 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-79,TYPE FBE MIL SPEC SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL | COTTON AND PLASTIC PHENOLIC RETAINER |
| MATERIAL | OIL LUBRICATION |
| MATERIAL | STEEL COMP 440C BALL |
| MATERIAL | STEEL COMP 440C INNER RING |
| MATERIAL | STEEL COMP 440C OUTER RING |
| MATERIAL | STEEL CORROSION RESISTING SHIELD |
| SHIELD QUANTITY | 2 |
| RETAINER FABRICATION METHOD | PRESSED |
| SPECIAL FEATURES | VACUUM IMPREGNATE RETAINER WITH SPECIFIED OIL,CENTRIFUGE FOR 2 MINUTES AT 100 G AFTER VACUUM; INSCRIBE MATCH MARK ON OD OF EACH BEARING; ONE SHIELD EACH BEARING |
| SPECIFICATION/STANDARD DATA | 82577-901861 MANUFACTURERS STANDARD |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 5T |
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING |
| SURFACE FINISH | GROUND |