6150-00-993-5568 CABLE ASSEMBLY,SPECIAL PURPOSE,E Index 5320-00-993-5575 RIVET,TUBULAR

National Stock Number:
3120-00-993-5569

Federal Supply Class:
3120

National Item Identification Number:
009935569

Description:
BEARING,WASHER,THRUST

Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.


Manufacturer Information:
WA292808484BREEZE-EASTERN LLC


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CORNER SHAPESQUARE FIRST INSIDE CORNER
CORNER SHAPESQUARE FIRST OUTSIDE CORNER
CORNER SHAPESQUARE FOURTH OUTSIDE CORNER
CORNER SHAPESQUARE SECOND INSIDE CORNER
CORNER SHAPESQUARE SECOND OUTSIDE CORNER
CORNER SHAPESQUARE THIRD OUTSIDE CORNER
CROSS-SECTIONAL SHAPE STYLESHOULDERED
DIAMETER0.7880 INCHES MINIMUM AND 0.7900 INCHES MAXIMUM
FLANGE THICKNESS0.0976 INCHES MINIMUM AND 0.0996 INCHES MAXIMUM
HARDNESS RATING58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
OVERALL THICKNESS0.1026 INCHES MINIMUM AND 0.1046 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER1.6260 INCHES MINIMUM AND 1.6360 INCHES MAXIMUM
SHANK OUTSIDE DIAMETER1.3900 INCHES MINIMUM AND 1.4100 INCHES MAXIMUM
SPECIAL FEATURESLEFT SIDE AND RIGHT FACE OF FLANGE PARALLEL WITHIN 0.0002 IN. TOTAL INDICATORREADING
STYLE DESIGNATORROUND
SURFACE FINISH10.0 MICROINCHES LEFT SIDE
SURFACE FINISH210.0 MICROINCHES RIGHT SIDE


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us