3120-01-009-0066 BEARING,SLEEVE Index 5307-01-009-0068 STUD,PLAIN

National Stock Number:
3120-01-009-0067

Federal Supply Class:
3120

National Item Identification Number:
010090067

Description:
BEARING,WASHER,THRUST

Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.


Manufacturer Information:
254154710001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER


Techincal Specification:
BEARING SURFACE HOLE DIAMETER0.2500 INCHES NOMINAL FIRST
BEARING SURFACE HOLE QUANTITY6 FIRST
CENTER HOLE SHAPE STYLEROUND
CORNER SHAPECHAMFERED FIRST INSIDE CORNER
CORNER SHAPECHAMFERED FIRST OUTSIDE CORNER
CORNER SHAPECHAMFERED FOURTH OUTSIDE CORNER
CORNER SHAPECHAMFERED SECOND INSIDE CORNER
CORNER SHAPEROUND THIRD OUTSIDE CORNER
CORNER SHAPEROUND SECOND OUTSIDE CORNER
COUNTERBORE DIAMETER1.3745 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM
DIAMETER1.1880 INCHES NOMINAL
FLANGE THICKNESS0.4700 INCHES NOMINAL
OUTSIDE DIAMETER2.9800 INCHES NOMINAL
OVERALL THICKNESS0.6950 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8,T651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 6061 OVERALL
SHANK OUTSIDE DIAMETER1.7490 INCHES NOMINAL
SPECIAL FEATURESENAMEL,MIL-E-15090,TY 3,CL 1 EXTERNAL SURFACE; W/6 INSERT SCREW THD MS21209F4-15
STYLE DESIGNATORROUND
SURFACE FINISH125.0 MICROINCHES COUNTERBORE DIAMETER
SURFACE FINISH125.0 MICROINCHES LARGEST OUTSIDE DIAMETER
SURFACE FINISH125.0 MICROINCHES LEFT SIDE
SURFACE FINISH125.0 MICROINCHES RIGHT SIDE
SURFACE FINISH125.0 MICROINCHES RIGHT SIDE OF FLANGE
SURFACE FINISH125.0 MICROINCHES SMALLEST OUTSIDE DIAMETER
SURFACE FINISH32.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE
SURFACE TREATMENTOXIDE FILM RIGHT END SURFACE OF LEFT FLANGE
SURFACE TREATMENTOXIDE FILM OUTSIDE DIAMETER SURFACE OF BODY


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us