| BORE DIAMETER | 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 1.9060 INCHES NOMINAL |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY |
| HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER |
| INNER MEMBER WIDTH | 0.4040 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM |
| INSPECTION HOLE CENTER TO END DISTANCE | 0.4370 INCHES NOMINAL |
| OUTER MEMBER OUTSIDE DIAMETER | 1.1310 INCHES NOMINAL |
| OUTER MEMBER WIDTH | 0.3170 INCHES MINIMUM AND 0.3270 INCHES MAXIMUM |
| OVERALL LENGTH | 2.4715 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER |
| MATERIAL | STEEL COMP E4340 ROD END BODY |
| MATERIAL | STEEL COMP 440C OR STEEL COMP XM-13 INNER MEMBER |
| SHANK STYLE | INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE |
| SHANK THREAD LENGTH | 1.0000 INCHES MINIMUM |
| SHANK WIDTH ACROSS WRENCH FLATS | 0.4910 INCHES MINIMUM AND 0.5110 INCHES MAXIMUM |
| SPECIAL FEATURES | KEYSLOTS IN SHANK END |
| SPECIFICATION/STANDARD DATA | 76301-ST4-208 MANUFACTURERS STANDARD |
| STATIC RADIAL LOAD RATING | 13400 POUNDS |
| STYLE DESIGNATOR | BALL TYPE |
| THREAD CLASS | 3B |
| THREAD DIAMETER | 0.3750 INCHES NOMINAL |
| THREAD DIRECTION | LEFT-HAND |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |