3110-01-361-9853 CUP,TAPERED ROLLER BEARING Index 5365-01-361-9855 SPACER,SLEEVE

National Stock Number:
3120-01-361-9854

Federal Supply Class:
3120

National Item Identification Number:
013619854

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
1676AS255-130003NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER


Techincal Specification:
BODY INSIDE DIAMETER1.0400 INCHES MINIMUM AND 1.0450 INCHES MAXIMUM
CORNER SHAPECHAMFERED OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE CENTER FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE CENTER FLANGE RIGHT BODY CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE CENTER FLANGE LEFT BODY CORNER
CORNER SHAPESQUARE CENTER FLANGE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
END TO FLANGE DISTANCE0.6000 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM
FLANGE OUTSIDE DIAMETER2.7250 INCHES MINIMUM AND 2.7350 INCHES MAXIMUM
FLANGE WIDTH0.2550 INCHES NOMINAL
LEFT END BODY DIAMETER2.5100 INCHES MINIMUM AND 2.5150 INCHES MAXIMUM
LUBRICANT ACCOMMODATION STYLEGROOVED OPEN BOTH ENDS
OVERALL LENGTH3.9800 INCHES MINIMUM AND 4.0200 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
RIGHT END BODY DIAMETER2.5100 INCHES MINIMUM AND 2.5150 INCHES MAXIMUM
STYLE DESIGNATORSOLID, EXTERNAL FLANGE
SPECIAL FEATURESTHRU HOLE 0.560 IN DIA FROM LEFT TO RIGHT END SURFACES OF BODY
SURFACE FINISH63.0 MICROINCHES OVERALL
SURFACE GROOVE LOCATION AND QUANTITY1 EXTERNAL AND 1 INTERNAL


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us