|
|
|
National Stock Number:
4330-01-104-1013
Federal Supply Class:
4330
National Item Identification Number:
011041013
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 2312353 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7579280 | 05228 | PTI TECHNOLOGIES INC. | | AC2291F10 | 18350 | PALL AEROPOWER CORPORATION | | MIL-F-83861 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-83861 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M83861/2-1 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DROP PRESSURE | 4500.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.188 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.052 INCHES NOMINAL | | BODY OVERALL LENGTH | 3.115 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 15.0 ABSOLUTE | | FLOW DIRECTION | PARALLEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILTER ELEMENT, FLUID | | MATERIAL | STEEL CORROSION RESISTING BODY | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/CLOSED ENDS | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 300.0 FAHRENHEIT MAXIMUM |
|
|